MARC details
| 000 -LEADER |
|---|
| fixed length control field |
03030nam a2200277 a 4500 |
| 001 - CONTROL NUMBER |
|---|
| control field |
vtls000052478 |
| 003 - CONTROL NUMBER IDENTIFIER |
|---|
| control field |
KUKTEM |
| 005 - DATE AND TIME OF LATEST TRANSACTION |
|---|
| control field |
20251114204444.0 |
| 008 - FIXED-LENGTH DATA ELEMENTS--GENERAL INFORMATION |
|---|
| fixed length control field |
110330t2010 my a f m 000 0 eng d |
| 020 ## - INTERNATIONAL STANDARD BOOK NUMBER |
|---|
| International Standard Book Number |
THE0006548(Local) |
| 039 #9 - LEVEL OF BIBLIOGRAPHIC CONTROL AND CODING DETAIL [OBSOLETE] |
|---|
| Level of rules in bibliographic description |
201905141530 |
| Level of effort used to assign nonsubject heading access points |
amirul |
| Level of effort used to assign subject headings |
201110041138 |
| Level of effort used to assign classification |
Fida |
| Level of effort used to assign subject headings |
201107140042 |
| Level of effort used to assign classification |
VLOAD |
| Level of effort used to assign subject headings |
201103301007 |
| Level of effort used to assign classification |
ida |
| -- |
201103300958 |
| -- |
ida |
| 040 ## - CATALOGING SOURCE |
|---|
| Original cataloging agency |
UMP |
| 090 ## - LOCALLY ASSIGNED LC-TYPE CALL NUMBER (OCLC); LOCAL CALL NUMBER (RLIN) |
|---|
| Classification number (OCLC) (R) ; Classification number, CALL (RLIN) (NR) |
TJ1186 .S25 2010 rs Bc. |
| 100 0# - MAIN ENTRY--PERSONAL NAME |
|---|
| Personal name |
Mohamad Saiful Izwan Busu |
| 245 10 - TITLE STATEMENT |
|---|
| Title |
Wear of coated carbide insert in machining of mild steel / |
| Statement of responsibility, etc. |
Mohamad Saiful Izwan Busu |
| 246 3# - VARYING FORM OF TITLE |
|---|
| Title proper/short title |
Wear of coated carbide insert in machining of mild steel |
| Medium |
[computer file] |
| 260 ## - PUBLICATION, DISTRIBUTION, ETC. |
|---|
| Place of publication, distribution, etc. |
Kuantan, Pahang : |
| Name of publisher, distributor, etc. |
UMP, |
| Date of publication, distribution, etc. |
2010 |
| 300 ## - PHYSICAL DESCRIPTION |
|---|
| Extent |
xiv, 58 p. : |
| Other physical details |
ill. (some col.) ; |
| Dimensions |
30 cm. + |
| Accompanying material |
1 computer disc |
| 502 ## - DISSERTATION NOTE |
|---|
| Dissertation note |
Project paper (Bachelor of Mechanical Engineering with Manufacturing Engineering) -- Universiti Malaysia Pahang - 2010 |
| 504 ## - BIBLIOGRAPHY, ETC. NOTE |
|---|
| Bibliography, etc. note |
Bibliography : p. 53-54 |
| 520 3# - SUMMARY, ETC. |
|---|
| Summary, etc. |
This thesis deals with the wear of coated carbide insert in machining of mild steel. Machineability of mild steel is considered good although the cutting temperature is high. The characteristic of mild steel like high strength, high resistance to breakage and high modulus of elasticity has increased the tool wear of the coated carbide when it is used to machining the mild steel for long period. As a result, tool wear of the coated carbide inserts in machining of mild steel still need to be improved. The main objective of this project is to examine the progress of tool wear and determine the crater wear and flank wear of the tool in machining the mild steel in turning process. In this project, 33 full factorial design of experiments (DOE) was employed in STATISTICA software to plan and perform the experiment systematically so that any possible experimental error would be minimized. Machining variables considered are cutting length, cutting speed and feed rate. The variables for three levels were 90,120 and 150 m/min for cutting speed, 0.05, 0.1 and 0.15 mm/rev for feed rate and 60, 120 and 180 mm for cutting length respectively. Machining of mild steel was carried out by using the conventional lathe machine. After each experiment, flank and crater wear of the coated carbide inserts was investigated and measured by using optical microscope integrated with Image Analyzer. Experimental data was analyzed in STATISTICA. Flank and crater wear curves were then plotted using Minitab software. The result indicates that feed rate is the most significant parameter that influencing both the flank and crater wear compared to cutting speed and cutting length. Optical micrograph of tool wear shows the crater wear progressed faster than flank wear. Tool wear curves shows that when the number of experiments increases, the flank and crater wear increase monotonically. |
| 650 #0 - SUBJECT ADDED ENTRY--TOPICAL TERM |
|---|
| Topical term or geographic name entry element |
Cutting tools |
| 650 #0 - SUBJECT ADDED ENTRY--TOPICAL TERM |
|---|
| Topical term or geographic name entry element |
Surface (Technology) |
| 650 #0 - SUBJECT ADDED ENTRY--TOPICAL TERM |
|---|
| Topical term or geographic name entry element |
Metal-cutting |