MARC details
| 000 -LEADER |
|---|
| fixed length control field |
02499nam a2200265 a 4500 |
| 001 - CONTROL NUMBER |
|---|
| control field |
vtls000065577 |
| 003 - CONTROL NUMBER IDENTIFIER |
|---|
| control field |
KUKTEM |
| 005 - DATE AND TIME OF LATEST TRANSACTION |
|---|
| control field |
20251114204522.0 |
| 008 - FIXED-LENGTH DATA ELEMENTS--GENERAL INFORMATION |
|---|
| fixed length control field |
121102t2012 my da f m 000 0 eng d |
| 020 ## - INTERNATIONAL STANDARD BOOK NUMBER |
|---|
| International Standard Book Number |
THE0006526(Local) |
| 039 #9 - LEVEL OF BIBLIOGRAPHIC CONTROL AND CODING DETAIL [OBSOLETE] |
|---|
| Level of rules in bibliographic description |
201905141454 |
| Level of effort used to assign nonsubject heading access points |
amirul |
| Level of effort used to assign subject headings |
201211081208 |
| Level of effort used to assign classification |
huda |
| Level of effort used to assign subject headings |
201211021601 |
| Level of effort used to assign classification |
huda |
| -- |
201211021600 |
| -- |
huda |
| 040 ## - CATALOGING SOURCE |
|---|
| Original cataloging agency |
UMP |
| 090 ## - LOCALLY ASSIGNED LC-TYPE CALL NUMBER (OCLC); LOCAL CALL NUMBER (RLIN) |
|---|
| Classification number (OCLC) (R) ; Classification number, CALL (RLIN) (NR) |
TJ1185 .Z87 2012 rs Bc. |
| 100 0# - MAIN ENTRY--PERSONAL NAME |
|---|
| Personal name |
Zuraifah Kamarudin |
| 245 10 - TITLE STATEMENT |
|---|
| Title |
Machinability study on drilling austenite stainless steel 316l1 using minimum quantity lubrication (MQL) on surface roughness / |
| Statement of responsibility, etc. |
Zuraifah Kamarudin |
| 260 ## - PUBLICATION, DISTRIBUTION, ETC. |
|---|
| Place of publication, distribution, etc. |
Kuantan, Pahang : |
| Name of publisher, distributor, etc. |
UMP , |
| Date of publication, distribution, etc. |
2012 |
| 300 ## - PHYSICAL DESCRIPTION |
|---|
| Extent |
xiii, 44 p. : |
| Other physical details |
ill. (some col.) ; |
| Dimensions |
30 cm. + |
| Accompanying material |
1 CD-ROM |
| 502 ## - DISSERTATION NOTE |
|---|
| Dissertation note |
Project paper (Bachelor of Manufacturing Engineering) -- Universiti Malaysia Pahang - 2012 |
| 504 ## - BIBLIOGRAPHY, ETC. NOTE |
|---|
| Bibliography, etc. note |
Bibliography : p. 42-44 |
| 520 ## - SUMMARY, ETC. |
|---|
| Summary, etc. |
This research was carried out to determine the optimum condition of cutting speed, feed rate and point of angle while drilling the austenite stainless steel in order to get the good surface finish by using Minimum Quantity Lubrication (MQL). This project focuses on the drilling small hole on the austenite stainless steel by using milling machine. The aim of this project is to find the optimum condition in producing the good surface finish in drilling process with MQL. The Taguchi OA from software Minitab 16 was used to formulate the experiment, to analyze the three factors and also to predict the optimal choices of the drilling parameters. The selected cutting speeds for the drilling process are 15m/min, 25m/min and 35m/min. For the feed rate, the parameters are 0.1mm/rev, 0.15mm/rev and 0.2mm/rev. The third parameter that will be considered in this project is point of angle, and the parameters that will be used are about 110°, 120° and 135°. The machining processes were performed on the CNC milling machine. The surface roughness will be test by using Surfcom 130A. Results shows that, the best surface roughness were obtained at the lower cutting speed, middle of feed rate and middle of point of angle. So, the optimum cutting speed, feed rate and point of angle are, 15m/min, 0.15mm/rev and 120°. The confirmation results show that, the predicted values and the measured values are quite close to each other. |
| 650 #0 - SUBJECT ADDED ENTRY--TOPICAL TERM |
|---|
| Topical term or geographic name entry element |
Metals |
| General subdivision |
Machinability |
| 650 #0 - SUBJECT ADDED ENTRY--TOPICAL TERM |
|---|
| Topical term or geographic name entry element |
Austenitic stainless steel |
| 650 #0 - SUBJECT ADDED ENTRY--TOPICAL TERM |
|---|
| Topical term or geographic name entry element |
Austenite |