Experimental and simulation study on the effect of inner span in a four-point bending test (4pb) / (Record no. 4599)
[ view plain ]
| 000 -LEADER | |
|---|---|
| fixed length control field | 03039nam a2200253 a 4500 |
| 001 - CONTROL NUMBER | |
| control field | vtls000077956 |
| 003 - CONTROL NUMBER IDENTIFIER | |
| control field | KUKTEM |
| 005 - DATE AND TIME OF LATEST TRANSACTION | |
| control field | 20251114204602.0 |
| 008 - FIXED-LENGTH DATA ELEMENTS--GENERAL INFORMATION | |
| fixed length control field | 140506t2012 my a f m 000 0 eng d |
| 020 ## - INTERNATIONAL STANDARD BOOK NUMBER | |
| International Standard Book Number | THE0005707(Local) |
| 039 #9 - LEVEL OF BIBLIOGRAPHIC CONTROL AND CODING DETAIL [OBSOLETE] | |
| Level of rules in bibliographic description | 201905211454 |
| Level of effort used to assign nonsubject heading access points | hanafiah |
| Level of effort used to assign subject headings | 201407111438 |
| Level of effort used to assign classification | saini |
| -- | 201405061212 |
| -- | training3 |
| 040 ## - CATALOGING SOURCE | |
| Original cataloging agency | UMP |
| 090 ## - LOCALLY ASSIGNED LC-TYPE CALL NUMBER (OCLC); LOCAL CALL NUMBER (RLIN) | |
| Classification number (OCLC) (R) ; Classification number, CALL (RLIN) (NR) | TA410 .Z35 2012 rs Bc. |
| 100 0# - MAIN ENTRY--PERSONAL NAME | |
| Personal name | Muhammad Zaki Che Md Nor |
| 245 10 - TITLE STATEMENT | |
| Title | Experimental and simulation study on the effect of inner span in a four-point bending test (4pb) / |
| Statement of responsibility, etc. | Muhammad Zaki Che Md Nor |
| 260 ## - PUBLICATION, DISTRIBUTION, ETC. | |
| Place of publication, distribution, etc. | Kuantan, Pahang : |
| Name of publisher, distributor, etc. | UMP, |
| Date of publication, distribution, etc. | 2012 |
| 300 ## - PHYSICAL DESCRIPTION | |
| Extent | xiii, 77 p. : |
| Other physical details | ill. (some col.) ; |
| Dimensions | 30 cm. + |
| Accompanying material | 1 CD-ROM |
| 502 ## - DISSERTATION NOTE | |
| Dissertation note | Project paper (Bachelor of Mechanical Engineering) -- Universiti Malaysia Pahang – 2012 |
| 504 ## - BIBLIOGRAPHY, ETC. NOTE | |
| Bibliography, etc. note | Bibliography : p. 66-69 |
| 520 3# - SUMMARY, ETC. | |
| Summary, etc. | The main aim of this study is to compare experimental four point bending test with finite element simulation. This study begins with a literature study. It was followed by design and fabrication of test equipment for four point bending test. This study begins with a preliminary design using Solidwork software and fabrication of a test equipment for four point bending test. This research work exposes student with many aspect of engineering work; design, fabrication and testing a product. The fabricated test rig consists of three main parts. Finite element evaluation is one of the methods in predicting the strain value in sheet metal bending. Predicting the strain value is sometimes used in areas of plastic deformation, which is the integral of the ratio of the incremental change in length to the instantaneous length of a plastically deformed. This thesis aims to evaluate the reliability of finite element method by comparing the results with experimental results. The effect of parameters such as length of displacement after bend also has been studied. Abaqus software has been used to simulate the bending process and the mechanical properties provided from the Solidwork data will be used to run the simulation. In the four-point bending experiment, the test rig was clamped on Shimadzu machine and the mild steel sheets was assembled with strain gauge before bend process was run. Strain value being measured with Dasylab software. The results from the experiment and simulation is slightly different for value of strain, which the simulation shows the value of strain higher than strain value that was get from the experiment. For the free force four-point bending, value length displacement after bend almost the same on the simulation and experimental. Finite element method can be used to make comparison since the pattern of the graphs are nearly the same and percentages of error are below 10 %. The further study on parameters that effected bending process will make the finite element method is important in the future. |
| 650 #0 - SUBJECT ADDED ENTRY--TOPICAL TERM | |
| Topical term or geographic name entry element | Bending |
| 650 #0 - SUBJECT ADDED ENTRY--TOPICAL TERM | |
| Topical term or geographic name entry element | Strains and stresses |
| General subdivision | Analysis |
| Withdrawn status | Lost status | Damaged status | Not for loan | Home library | Current library | Date acquired | Total checkouts | Full call number | Barcode | Date last seen | Copy number | Price effective from | Koha item type |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Not lost | Not for loan | UMPLIB PEKAN | UMPLIB PEKAN | 04/09/2019 | TA410 .Z35 2012 rs Bc. | 0000072715 | 04/09/2019 | 1 | 04/09/2019 | Final Year Report | |||
| Not lost | Not for loan | UMPLIB PEKAN | UMPLIB PEKAN | 04/09/2019 | CD 6885 | TA410 .Z35 2012 rs Bc. | 0000072716 | 04/09/2019 | 1 | 04/09/2019 | Final Year Report |