MARC details
| 000 -LEADER |
|---|
| fixed length control field |
03664ntm a2200289 a 4500 |
| 001 - CONTROL NUMBER |
|---|
| control field |
vtls000096871 |
| 003 - CONTROL NUMBER IDENTIFIER |
|---|
| control field |
KUKTEM |
| 005 - DATE AND TIME OF LATEST TRANSACTION |
|---|
| control field |
20251117113317.0 |
| 008 - FIXED-LENGTH DATA ELEMENTS--GENERAL INFORMATION |
|---|
| fixed length control field |
160804t2016 my da f abm 000 0 eng d |
| 020 ## - INTERNATIONAL STANDARD BOOK NUMBER |
|---|
| International Standard Book Number |
THE0000950(Local) |
| 039 #9 - LEVEL OF BIBLIOGRAPHIC CONTROL AND CODING DETAIL [OBSOLETE] |
|---|
| Level of rules in bibliographic description |
201905271046 |
| Level of effort used to assign nonsubject heading access points |
nazirah |
| Level of effort used to assign subject headings |
201710021217 |
| Level of effort used to assign classification |
aishah |
| -- |
201608041133 |
| -- |
saini |
| 040 ## - CATALOGING SOURCE |
|---|
| Original cataloging agency |
UMP |
| 090 ## - LOCALLY ASSIGNED LC-TYPE CALL NUMBER (OCLC); LOCAL CALL NUMBER (RLIN) |
|---|
| Classification number (OCLC) (R) ; Classification number, CALL (RLIN) (NR) |
FKKSA .M67 2016 r Thesis |
| 100 1# - MAIN ENTRY--PERSONAL NAME |
|---|
| Personal name |
Moshiul Alam, A. K. M. |
| 245 10 - TITLE STATEMENT |
|---|
| Title |
Fabrication and characterization of modified multi walled carbon nanotube reinforced unsaturated polyester nanocomposites / |
| Statement of responsibility, etc. |
Abu Kashem Mohammad Moshiul Alam |
| 260 ## - PUBLICATION, DISTRIBUTION, ETC. |
|---|
| Place of publication, distribution, etc. |
Kuantan, Pahang : |
| Name of publisher, distributor, etc. |
UMP, |
| Date of publication, distribution, etc. |
2016 |
| 300 ## - PHYSICAL DESCRIPTION |
|---|
| Extent |
xxi, 204 p. : |
| Other physical details |
ill. (some col.) ; |
| Dimensions |
30 cm. + |
| Accompanying material |
1 CD-ROM |
| 500 ## - GENERAL NOTE |
|---|
| General note |
Faculty of Chemical & Natural Resources Engineering |
| 502 ## - DISSERTATION NOTE |
|---|
| Dissertation note |
Thesis (Doctor of Philosophy in Chemical Engineering) -- Universiti Malaysia Pahang – 2016 |
| 504 ## - BIBLIOGRAPHY, ETC. NOTE |
|---|
| Bibliography, etc. note |
Bibliography : p. 169-202 |
| 520 3# - SUMMARY, ETC. |
|---|
| Summary, etc. |
This research presents a non-destructive modification of multi-walled carbon nanotube (MWCNT) and fabrication of MWCNT reinforced unsaturated polyester resin (UPR) nanocomposite. In this work, pre-dispersion of MWCNTs was performed in the tetra hydro furan (THF) solvent. In addition, pre-dispersion and post- dispersion time was optimized as 1.5 hour and 2 hour, respectively. The pre-dispersed MWCNT reinforced UPR (THF-MWCNT-UPR) nanocomposite exhibited better properties as compared to directly dispersed MWCNT reinforced UPR (MWCNT-UPR) nanocomposite. The optimum amount of MWCNT was evaluated through mechanical properties of nanocomposites contained 0.05 to 0.5 wt% MWCNT. The experimental tensile modulus (TM) of 0.3 wt% MWCNT reinforced 0.3CNT-UPR nanocomposite linearly fitted with Halpin –Tsai equation. Therefore, 0.3 wt% MWCNT was suggested as the optimum quantity. The nondefect modification of MWCNT was carried out with hyper branched polyester (HBP) and shellac (SL) functional polymers. The structural and thermal properties of 10 wt% HBP and SL coated HBCNT and SLCNT was noticeably improved as compared to pristine MWCNT. Moreover, 10 wt% HBP and SL coated HBCNT and SLCNT nanotubes remarkably reduced the curing temperature of nanosuspensions. Therefore, 10 wt% was considered as the optimum amount of HBP and SL to modify MWCNT. Optimum HBP coated MWCNT incorporated (OHBPCNT-UPR) nanocomposite became stiff. Conversely, optimum SL coated MWCNT incorporated (OSLCNT-UPR) nanocomposite became tough as compared to MWCNT reinforced nanocomposite. Different ratios of HBCNT and hydroxyl (OH) functionalized MWCNT (OHCNT) were incorporated in UPR to fabricate hybrid (HBOHCNT-UPR) nanocomposites. The ratio of HBCNT and OHCNT was optimized as 2:1 through the curing behavior of hybrid nanosuspensions. The comparative study was carried out among non-covalent and covalent functionalized as well as hybrid MWCNT reinforced UPR nanocomposites. Hybrid MWCNT incorporated nanosuspension exhibited the lowest curing temperature as compared to non-covalent and covalent functionalized MWCNT incorporated nanosuspensions. The hybrid nanocomposite exhibited the highest stiffness among nanocomposites which was individually fabricated with HBCNT and OHCNT. The mixture of non-covalent functionalized and covalent functionalized MWCNT jointly reinforced the properties of UPR |
| 610 20 - SUBJECT ADDED ENTRY--CORPORATE NAME |
|---|
| Corporate name or jurisdiction name as entry element |
Faculty of Chemical & Natural Resources Engineering |
| General subdivision |
Dissertations |
| 650 #0 - SUBJECT ADDED ENTRY--TOPICAL TERM |
|---|
| Topical term or geographic name entry element |
Universities and Colleges |
| General subdivision |
Dissertations |
| 650 #0 - SUBJECT ADDED ENTRY--TOPICAL TERM |
|---|
| Topical term or geographic name entry element |
Theses |
| 856 40 - ELECTRONIC LOCATION AND ACCESS |
|---|
| Uniform Resource Identifier |
<a href="http://ecollib.ump.edu.my/3515/">http://ecollib.ump.edu.my/3515/</a> |
| Public note |
Access in library only |