MARC details
| 000 -LEADER |
|---|
| fixed length control field |
03000ntm a2200289 a 4500 |
| 001 - CONTROL NUMBER |
|---|
| control field |
vtls000102354 |
| 003 - CONTROL NUMBER IDENTIFIER |
|---|
| control field |
KUKTEM |
| 005 - DATE AND TIME OF LATEST TRANSACTION |
|---|
| control field |
20251117113357.0 |
| 008 - FIXED-LENGTH DATA ELEMENTS--GENERAL INFORMATION |
|---|
| fixed length control field |
171102s2017 my da f abm 000 0 eng d |
| 020 ## - INTERNATIONAL STANDARD BOOK NUMBER |
|---|
| International Standard Book Number |
THE0000210(Local) |
| 039 #9 - LEVEL OF BIBLIOGRAPHIC CONTROL AND CODING DETAIL [OBSOLETE] |
|---|
| Level of rules in bibliographic description |
201905141041 |
| Level of effort used to assign nonsubject heading access points |
nazirah |
| Level of effort used to assign subject headings |
201712141237 |
| Level of effort used to assign classification |
nazri |
| -- |
201711021042 |
| -- |
saini |
| 040 ## - CATALOGING SOURCE |
|---|
| Original cataloging agency |
UMP |
| 090 ## - LOCALLY ASSIGNED LC-TYPE CALL NUMBER (OCLC); LOCAL CALL NUMBER (RLIN) |
|---|
| Classification number (OCLC) (R) ; Classification number, CALL (RLIN) (NR) |
FIST .S934 2017 r Bc. |
| 100 0# - MAIN ENTRY--PERSONAL NAME |
|---|
| Personal name |
Noor Syafiqah Hassin |
| 245 10 - TITLE STATEMENT |
|---|
| Title |
Effect of activated carbon to the structural properties of copper zinc ferrite prepared via mechanosynthesis / |
| Statement of responsibility, etc. |
Noor Syafiqah Hassin |
| 260 ## - PUBLICATION, DISTRIBUTION, ETC. |
|---|
| Place of publication, distribution, etc. |
Kuantan, Pahang : |
| Name of publisher, distributor, etc. |
UMP, |
| Date of publication, distribution, etc. |
[2017] |
| 300 ## - PHYSICAL DESCRIPTION |
|---|
| Extent |
xi, 34 p. : |
| Other physical details |
ill. (some col.), charts ; |
| Dimensions |
30 cm. + |
| Accompanying material |
1 CD-ROM |
| 500 ## - GENERAL NOTE |
|---|
| General note |
Faculty of Industrial Sciences and Technology |
| 502 ## - DISSERTATION NOTE |
|---|
| Dissertation note |
Project Paper (Bachelor of Applied Science (Honor) Material Technology) -- Universiti Malaysia Pahang – 2017 |
| 504 ## - BIBLIOGRAPHY, ETC. NOTE |
|---|
| Bibliography, etc. note |
Bibliography : p. 31-32 |
| 520 3# - SUMMARY, ETC. |
|---|
| Summary, etc. |
In this research, copper zinc ferrite nanoparticles, Cu0.2Zn0.8Fe2O4 were successfully produced by mechanosynthesis method. Cu0.2Zn0.8Fe2O4 nanoparticle precursor were produced dried Fe2O3, CuO and ZnO were mixed with a molar ratio of 1:0.1:0.4 to form the mixture. After ball milled for 8 hours at 600 rpm with ball to powder ratio of 10:1, the brownish powder of copper zinc ferrite nanoparticles, dried at 120 °C in air and then were calcined at 750 °C for an hour. The activated carbon were produced from sawdust via pyrolysis method using nitrogen gas. Copper zinc ferrite nanoparticles were added with activated carbon with four different weight percentage of copper zinc ferrite and activated carbon and then were mixed homogenously by sol-gel method with the presence of absolute ethanol as fuel. The amorphous precursor of carbon copper zinc ferrite then characterized by Fourier Transform Infrared Spectroscopy (FTIR) Study , X-Ray Powder Diffraction (XRD) Analysis and Scanning Electron Microscopy (SEM) for the structural measurement of carbon copper zinc ferrite nanoparticle. The effect of activated carbon to the Cu0.2Zn0.8Fe2O4 were investigated. It was found that the activated carbon does not interrupt the magnetic properties of the Cu0.2Zn0.8Fe2O4 but the structure of the magnetite become lighter and more porous as the percentage weight of carbon is increasing. From the XRD data, at the weight percentage of 40%wt of Cu0.2Zn0.8Fe2O4 and 60% wt of activated carbon, the peak of magnetite at (3 1 1) was the highest and most sharp. Proving the by adding carbon to the copper zinc ferrite with that respective percentage weight does not affect the properties of copper zinc ferrite but does affect its structure. |
| 610 20 - SUBJECT ADDED ENTRY--CORPORATE NAME |
|---|
| Corporate name or jurisdiction name as entry element |
Faculty of Industrial Sciences and Technology |
| General subdivision |
Dissertations |
| 650 #0 - SUBJECT ADDED ENTRY--TOPICAL TERM |
|---|
| Topical term or geographic name entry element |
Universities and Colleges |
| General subdivision |
Dissertations |
| 650 #0 - SUBJECT ADDED ENTRY--TOPICAL TERM |
|---|
| Topical term or geographic name entry element |
Theses |
| 856 40 - ELECTRONIC LOCATION AND ACCESS |
|---|
| Uniform Resource Identifier |
<a href="http://ecollib.ump.edu.my/id/eprint/28003">http://ecollib.ump.edu.my/id/eprint/28003</a> |
| Public note |
Access in library only |