Normal view MARC view ISBD view

Testing statcom model in IEEE power system network using PSCAD software/ Mohd Firdaus Bin Daud

By:

Mohd Firdaus Daud

Material type: Text

TextPublication details: Kuantan, Pahang : UMP, 2008Description: 56 p. : ill. (some col.) ; 30 cm. + 1 computer discISBN:

THE0007022(Local)

Other title:

Testing statcom model in IEEE power system network using PSCAD software [electronic resource]

Subject(s):

Dissertation note: Project paper (Bachelor of Electrical Engineering (Power system)) -- Universiti Malaysia Pahang - 2008 Abstract: In any transmission system, the ultimate goals are to transmit power with high quality, economical and low risk of system failure. The ever increasing of power demands and loads especially non-linear loads making the power system network become complex to operate and the system becomes insecure with large power flows without adequate control. One way to introduce power system control is by applying controller known as FACTS (Flexible AC Transmission System) controllers. STATCOM (Static Synchronous Compensator) is one of the FACTS controllers and can be introduced to the power system to regulate terminal voltage and to improve system’s stability. By using IEEE 4 bus power system network, the effectiveness of STATCOM is tested by applying the controller at the critical location of the power system. The critical location of a power system is determined by the voltage drop that falls below 0.95 or above 1.05. Using PSCAD/EMTDC simulation software, the simulations of STATCOM in IEEE 4 bus power system networks can be realized. To verify the PSCAD/EMTDC simulation results, load flow analysis are acquired using MATLAB software through Hadi Saadat’s load flow analysis method. With these softwares, both systems’ power flow can be compared to determine the effectiveness of STATCOM in the power transmission system.

Tags from this library: No tags from this library for this title. Log in to add tags.

Average rating: 0.0 (0 votes)

Holdings ( 2 )
Title notes ( 2 )

Holdings
Item type	Current library	Call number	Copy number	Status	Date due	Barcode
Final Year Report	UMPLIB PEKAN	TK7881.15 .F57 2008 rs Bc. (Browse shelf(Opens below))	1	Not for loan		0000037260
Final Year Report	UMPLIB PEKAN	CD 3194 \| TK7881.15 .F57 2008 rs Bc. (Browse shelf(Opens below))	1	Not for loan		0000037261

Project paper (Bachelor of Electrical Engineering (Power system)) -- Universiti Malaysia Pahang - 2008

In any transmission system, the ultimate goals are to transmit power with high quality, economical and low risk of system failure. The ever increasing of power demands and loads especially non-linear loads making the power system network become complex to operate and the system becomes insecure with large power flows without adequate control. One way to introduce power system control is by applying controller known as FACTS (Flexible AC Transmission System) controllers. STATCOM (Static Synchronous Compensator) is one of the FACTS controllers and can be introduced to the power system to regulate terminal voltage and to improve system’s stability. By using IEEE 4 bus power system network, the effectiveness of STATCOM is tested by applying the controller at the critical location of the power system. The critical location of a power system is determined by the voltage drop that falls below 0.95 or above 1.05. Using PSCAD/EMTDC simulation software, the simulations of STATCOM in IEEE 4 bus power system networks can be realized. To verify the PSCAD/EMTDC simulation results, load flow analysis are acquired using MATLAB software through Hadi Saadat’s load flow analysis method. With these softwares, both systems’ power flow can be compared to determine the effectiveness of STATCOM in the power transmission system.