Normal view MARC view ISBD view

Effect of grinding process parameters on grinding force of aluminium alloys / Alexius An'yan

By:

Alexius An'yan

Material type: Text

TextPublication details: Kuantan, Pahang : UMP, 2008Description: 53 p. : ill. (some col.) ; 30 cm. + 1 computer discISBN:

THE0006638(Local)

Other title:

Effect of grinding process parameters on grinding force of aluminium alloys [electronic resource]

Subject(s):

Dissertation note: Project paper (Bachelor of Mechanical Engineering with Manufacturing) -- Universiti Malaysia Pahang - 2008 Abstract: Significant developments have recently been made in the grinding of metals. Many researches have been devoted to determining the effect of these grinding parameters towards grinding force. The aim of this project is to study the effect of grinding process parameters namely depth of cut, number of passes, and use of coolant on grinding force of aluminium alloy (AA6061-T6). A three component force transducer dynamometer (Kistler Model Type 5070) was used to measure grinding forces in this experiment. A full factorial experimental design was used as the approach for the design of experiment. Through the analysis of variance (ANOVA) conducted, it was found that the most significant parameter is the usage of coolant followed by depth of cut. Meanwhile, number of passes was found to be not significant. In conclusion, the grinding force values increased as the number of passes became higher in proportional to depth of cut. The grinding force also increased if running in dry condition.

Tags from this library: No tags from this library for this title. Log in to add tags.

Average rating: 0.0 (0 votes)

Holdings ( 2 )
Title notes ( 2 )

Holdings
Item type	Current library	Call number	Copy number	Status	Date due	Barcode
Final Year Report	UMPLIB PEKAN	TJ1280 .A44 2008 rs Bc. (Browse shelf(Opens below))	1	Not for loan		0000038724
Final Year Report	UMPLIB PEKAN	CD 3560 \| TJ1280 .A44 2008 rs Bc. (Browse shelf(Opens below))	1	Not for loan		0000038725

Project paper (Bachelor of Mechanical Engineering with Manufacturing) -- Universiti Malaysia Pahang - 2008

Significant developments have recently been made in the grinding of metals. Many researches have been devoted to determining the effect of these grinding parameters towards grinding force. The aim of this project is to study the effect of grinding process parameters namely depth of cut, number of passes, and use of coolant on grinding force of aluminium alloy (AA6061-T6). A three component force transducer dynamometer (Kistler Model Type 5070) was used to measure grinding forces in this experiment. A full factorial experimental design was used as the approach for the design of experiment. Through the analysis of variance (ANOVA) conducted, it was found that the most significant parameter is the usage of coolant followed by depth of cut. Meanwhile, number of passes was found to be not significant. In conclusion, the grinding force values increased as the number of passes became higher in proportional to depth of cut. The grinding force also increased if running in dry condition.