Normal view MARC view ISBD view

Relationship between machining parameters and surface roughness of brass using lathe machine / Raja Mohd. Raja Idris

By:

Raja Mohd. Raja Idris

Material type: Text

TextPublication details: Kuantan, Pahang : UMP, 2008Description: 39 p. : ill. (some col.) ; 30 cm. + 1 computer discISBN:

THE0005778(Local)

Other title:

Relationship between machining parameters and surface roughness of brass using lathe machine [electronic resource]

Subject(s):

Dissertation note: Project paper (Bachelor of Mechanical Engineering with Manufacturing) -- Universiti Malaysia Pahang - 2008 Abstract: Surface roughness is a consequence of all machining operations and has been the subject of investigative research for the better part of the last century because the product produce good surface finish is very valuable. But, not all the product needs a good surface finish. If the product not demands a good surface finish, the time of machining can be reduce to minimize the cost. This is about the effect of machining parameters on surface roughness using lathe machine. The focus of this project is to study the effect of Cutting speed, feed rate, and depth of cuts on brass`s surface roughness. The experiment was design using Design of experiment (DOE) method and from which number of experiment was constructed. The result show that feed rate is the most effected parameter on surface roughness when machining process then followed by depth of cut and cutting speed. All the parameters are proportional with brass`s surface roughness.

Tags from this library: No tags from this library for this title. Log in to add tags.

Average rating: 0.0 (0 votes)

Holdings ( 2 )
Title notes ( 2 )

Holdings
Item type	Current library	Call number	Copy number	Status	Date due	Barcode
Final Year Report	UMPLIB PEKAN	TA418.7 .M64 2008 rs Bc. (Browse shelf(Opens below))	1	Not for loan		0000038091
Final Year Report	UMPLIB PEKAN	CD 3399 \| TA418.7 .M64 2008 rs Bc. (Browse shelf(Opens below))	1	Not for loan		0000038092

Project paper (Bachelor of Mechanical Engineering with Manufacturing) -- Universiti Malaysia Pahang - 2008

Surface roughness is a consequence of all machining operations and has been the subject of investigative research for the better part of the last century because the product produce good surface finish is very valuable. But, not all the product needs a good surface finish. If the product not demands a good surface finish, the time of machining can be reduce to minimize the cost. This is about the effect of machining parameters on surface roughness using lathe machine. The focus of this project is to study the effect of Cutting speed, feed rate, and depth of cuts on brass`s surface roughness. The experiment was design using Design of experiment (DOE) method and from which number of experiment was constructed. The result show that feed rate is the most effected parameter on surface roughness when machining process then followed by depth of cut and cutting speed. All the parameters are proportional with brass`s surface roughness.