Normal view MARC view ISBD view

Mold design for plastics injection molding process (two colors) and analysis of gates location/ Ahmad Zulhelmi Bin Muhamad

By:

Ahmad Zulhelmi Muhamad

Material type: Text

TextPublication details: Kuantan, Pahang : UMP, 2009Description: xviii, 80 p. : ill. (some col.) ; 30 cm. + 1 computer discISBN:

THE0007478(Local)

Other title:

Mold design for plastics injection molding process (two colors) and analysis of gates location [electronic resource]

Subject(s):

Dissertation note: Project paper (Bachelor of Mechanical Engineering with Manufacturing Engineering) -- Universiti Malaysia Pahang - 2009 Abstract: This thesis describe about the mold design for plastic injection molding process for two colors and the analysis of gate location in order to find the best gate location to apply it in to the design. The molds for injection molding is not the cheap one it is expensive and needed an accurate step when apply the design on the mold because a slice mistake can follow by big loss. First step is about finding the best gate location from several gate location have been choose but before that the design of the product and it materials should be choose. After the analysis have done, the collected data from several gate location will be compare in order to find best gate location and apply it in the mold design. To designing mold, the several system like runner system, injector system and the ways material enter the mold will be considered.

Tags from this library: No tags from this library for this title. Log in to add tags.

Average rating: 0.0 (0 votes)

Holdings ( 2 )
Title notes ( 3 )

Holdings
Item type	Current library	Call number	Copy number	Status	Date due	Barcode
Final Year Report	UMPLIB PEKAN	TP1150 .Z85 2009 rs Bc. (Browse shelf(Opens below))	1	Not for loan		0000044289
Final Year Report	UMPLIB PEKAN	CD 4168 \| TP1150 .Z85 2009 rs Bc. (Browse shelf(Opens below))	1	Not for loan		0000044290

Project paper (Bachelor of Mechanical Engineering with Manufacturing Engineering) -- Universiti Malaysia Pahang - 2009

Bibliography : p. 68-69

This thesis describe about the mold design for plastic injection molding process for two colors and the analysis of gate location in order to find the best gate location to apply it in to the design. The molds for injection molding is not the cheap one it is expensive and needed an accurate step when apply the design on the mold because a slice mistake can follow by big loss. First step is about finding the best gate location from several gate location have been choose but before that the design of the product and it materials should be choose. After the analysis have done, the collected data from several gate location will be compare in order to find best gate location and apply it in the mold design. To designing mold, the several system like runner system, injector system and the ways material enter the mold will be considered.