Normal view MARC view ISBD view

Comparison of the cutting force, power, tool life and torque in the end milling of modified AISI P20 tool steel / P. Vinothi A/L S Parawa Karan

By:

P. Vinothi S Parawa Karan

Material type: Text

TextPublication details: Kuantan, Pahang : UMP , 2009Description: xvi, 65 p. : ill. (some col.) ; 30 cm. + 1 CD-ROMISBN:

THE0006611(Local)

Subject(s):

Dissertation note: Project paper (Bachelor of Mechanical Engineering with Manufacturing Engineering) -- Universiti Malaysia Pahang - 2009 Abstract: The aim of this study is to make comparison of the cutting force, power, torque and tool life in the end milling of modified AISI P20 tool steel with aid of statistical method by using coated carbide cutting tool under various cutting conditions. The first and second order cutting force equations are developed using the response surface methodology (RSM) to study the effect of four input cutting parameters which is cutting speed, feed rate, radial depth and axial depth of cut on cutting force, power, torque and tool life. In general, the result that been obtained from the mathematical model are in good agreement with that obtained from the experiment data’s. It was found that the feed rate, cutting speed, axial depth and radial depth played a major role in determining the cutting tools. The predictive models in this study are believed to produce values of the longitudinal component of the cutting force close to those readings recorded experimentally with a 95% confident interval.

Tags from this library: No tags from this library for this title. Log in to add tags.

Average rating: 0.0 (0 votes)

Holdings ( 2 )
Title notes ( 2 )

Holdings
Item type	Current library	Call number	Copy number	Status	Date due	Barcode
Final Year Report	UMPLIB PEKAN	CD 4427 \| TJ1225 .P85 2009 rs Bc. (Browse shelf(Opens below))	1	Not for loan		0000046254
Final Year Report	UMPLIB PEKAN	TJ1225 .P85 2009 rs Bc. (Browse shelf(Opens below))	1	Not for loan		0000046253

Project paper (Bachelor of Mechanical Engineering with Manufacturing Engineering) -- Universiti Malaysia Pahang - 2009

The aim of this study is to make comparison of the cutting force, power, torque and tool life in the end milling of modified AISI P20 tool steel with aid of statistical method by using coated carbide cutting tool under various cutting conditions. The first and second order cutting force equations are developed using the response surface methodology (RSM) to study the effect of four input cutting parameters which is cutting speed, feed rate, radial depth and axial depth of cut on cutting force, power, torque and tool life. In general, the result that been obtained from the mathematical model are in good agreement with that obtained from the experiment data’s. It was found that the feed rate, cutting speed, axial depth and radial depth played a major role in determining the cutting tools. The predictive models in this study are believed to produce values of the longitudinal component of the cutting force close to those readings recorded experimentally with a 95% confident interval.