Normal view MARC view ISBD view

Design suitable punch or die to overcome springback on u-bending / Tuan Abdul Hadi Tuan Jusoh

By:

Tuan Abdul Hadi Tuan Jusoh

Material type: Text

TextPublication details: Kuantan, Pahang : UMP , 2012Description: xviii, 65 p. : ill. (some col.) ; 30 cm. + 1 CD-ROMISBN:

THE0007707(Local)

Subject(s):

Dissertation note: Project paper (Bachelor of Manufacturing Engineering) -- Universiti Malaysia Pahang - 2012 Summary: This project deals with the overcoming springback on u bending. Now days, many research and study have been done on a springback. In sheet metal bending, a flat part is bent using a set of punches and dies. The punch and the dies are mounted on a press machine, which control the relative motion between the punch and die and provides the necessary bending pressure. This project is done with simulation of springback using a material of Stainless Steel on U-bending process by using a 1 mm thickness and the size of the specimen is 100 mm x 90 mm. The springback of Stainless Steel sheet was investigated using finite element analysis. Hyperform software is used in this project to simulate the springback of sheet metal in U-bending. The main problem of the bending process is spring-back phenomenon after removing the punch. The aim of this study includes the springback optimization of the part that required U bending processes using the concept of experimental design a suitable punch or dies.

Tags from this library: No tags from this library for this title. Log in to add tags.

Average rating: 0.0 (0 votes)

Holdings ( 2 )
Title notes ( 3 )

Holdings
Item type	Current library	Call number	Copy number	Status	Date due	Barcode
Final Year Report	UMPLIB PEKAN	TS250 .H35 2012 rs Bc. (Browse shelf(Opens below))	1	Not for loan		0000067418
Final Year Report	UMPLIB PEKAN	CD 6268 \| TS250 .H35 2012 rs Bc. (Browse shelf(Opens below))	1	Not for loan		0000067419

Project paper (Bachelor of Manufacturing Engineering) -- Universiti Malaysia Pahang - 2012

Bibliography : p. 55-56

This project deals with the overcoming springback on u bending. Now days, many research and study have been done on a springback. In sheet metal bending, a flat part is bent using a set of punches and dies. The punch and the dies are mounted on a press machine, which control the relative motion between the punch and die and provides the necessary bending pressure. This project is done with simulation of springback using a material of Stainless Steel on U-bending process by using a 1 mm thickness and the size of the specimen is 100 mm x 90 mm. The springback of Stainless Steel sheet was investigated using finite element analysis. Hyperform software is used in this project to simulate the springback of sheet metal in U-bending. The main problem of the bending process is spring-back phenomenon after removing the punch. The aim of this study includes the springback optimization of the part that required U bending processes using the concept of experimental design a suitable punch or dies.