Normal view MARC view ISBD view

Optimization of molding parameter effect to warpage and shrinkage based on plastic flow simulation software : swimming google / Lai Si Ying

By:

Lai, Si Ying

Material type: Text

TextPublication details: Kuantan, Pahang : UMP, 2010Description: xiv, 88 p. : ill. (some col.) ; 30 cm. + 1 CD-ROMISBN:

THE0007465(Local)

Subject(s):

Dissertation note: Project paper (Bachelor of Mechanical Engineering with Manufacturing Engineering) -- Universiti Malaysia Pahang - 2010 Abstract: This thesis present about the optimization of molding parameter effect to warpage and shrinkage based on plastic flow simulation software: swimming goggles. The objective of this project is to study, analyze, and optimize the parameter that effect to warpage and shrinkage with using plastic flow simulation software. This project is using 3D scanner and draw swimming goggles in SolidWorks 2007. Swimming goggles lens is made by polycarbonate (PC) while swimming goggles frame is made by Acrylonitrile Butadiene Styrene (ABS). The injection molding parameters are optimized by using MoldFlow Plastics Insight (MPI) 5.0 software in order to get the best parameters with minimum warpage and shrinkage. The four injection molding parameter use is melt temperature, mold temperature, injection pressure and flow rate. The small changes of molding parameters will give higher impact to the plastic characteristics. The comparison between the types of analysis will be made. The comparison is between the deflections, fill times, and volumetric shrinkage. As the conclusion, the changes of injection molding parameters will affect the warpage of the swimming goggles.

Tags from this library: No tags from this library for this title. Log in to add tags.

Average rating: 0.0 (0 votes)

Holdings ( 2 )
Title notes ( 3 )

Holdings
Item type	Current library	Call number	Copy number	Status	Date due	Barcode
Final Year Report	UMPLIB PEKAN	CD 5060 \| TP1150 .L35 2010 rs Bc. (Browse shelf(Opens below))	1	Not for loan		0000054090
Final Year Report	UMPLIB PEKAN	TP1150 .L35 2010 rs Bc. (Browse shelf(Opens below))	1	Not for loan		0000054089

Project paper (Bachelor of Mechanical Engineering with Manufacturing Engineering) -- Universiti Malaysia Pahang - 2010

Bibliography : p.71-72

This thesis present about the optimization of molding parameter effect to warpage and shrinkage based on plastic flow simulation software: swimming goggles. The objective of this project is to study, analyze, and optimize the parameter that effect to warpage and shrinkage with using plastic flow simulation software. This project is using 3D scanner and draw swimming goggles in SolidWorks 2007. Swimming goggles lens is made by polycarbonate (PC) while swimming goggles frame is made by Acrylonitrile Butadiene Styrene (ABS). The injection molding parameters are optimized by using MoldFlow Plastics Insight (MPI) 5.0 software in order to get the best parameters with minimum warpage and shrinkage. The four injection molding parameter use is melt temperature, mold temperature, injection pressure and flow rate. The small changes of molding parameters will give higher impact to the plastic characteristics. The comparison between the types of analysis will be made. The comparison is between the deflections, fill times, and volumetric shrinkage. As the conclusion, the changes of injection molding parameters will affect the warpage of the swimming goggles.