Normal view MARC view ISBD view

Prediction of chatter in CNC machining based on dynamic cutting force for ball end milling / Nor Komariah Hasfa

By:

Nor Komariah Hasfa

Material type: Text

TextPublication details: Kuantan, Pahang : UMP, 2008Description: 60 p. : ill. (some col.) ; 30 cm. + 1 computer discISBN:

THE0006511(Local)

Subject(s):

Dissertation note: Project paper (Bachelor of Mechanical Engineering with Manufacturing) -- Universiti Malaysia Pahang - 2008 Abstract: This paper presents the suitable depth of cut, spindle speed and feed rate that will be chosen during machining. If thus parameters are not considered, this can provoke abnormal tool behavior such as chatter. Chatter will limit the tool life which only can be use for just a few times. To predict the chatter occurs, the parameters will be use are spindle speed, depth of cut and feed rate. CNC machine will be use. This process will base on dynamic cutting force model for ball end milling. The selections of cutting tool are depends on the process that will done where the chatter can be observed during this machining process. Cold work tool steel (AISI-D2) chosen as a material and its parameter is 100x100x25 mm. Cutter used was high speed steel 2 flute ball nose. Force dynamometer will be use to measure force and 27 tests will be done to observe the chatter occur. Analysis done by referring the result that measured by force dynamometer. The chatter in ball end milling can be detected from the calculated cutting forces and their frequency spectra. A comparison of the predicted and measured cutting forces demonstrated that the proposed method provides accurate results.

Tags from this library: No tags from this library for this title. Log in to add tags.

Average rating: 0.0 (0 votes)

Holdings ( 2 )
Title notes ( 2 )

Holdings
Item type	Current library	Call number	Copy number	Status	Date due	Barcode
Final Year Report	UMPLIB PEKAN	TJ1185 .K66 2008 rs Bc. (Browse shelf(Opens below))	1	Not for loan		0000038290
Final Year Report	UMPLIB PEKAN	CD 3498 \| TJ1185 .K66 2008 rs Bc. (Browse shelf(Opens below))	1	Not for loan		0000038291

Project paper (Bachelor of Mechanical Engineering with Manufacturing) -- Universiti Malaysia Pahang - 2008

This paper presents the suitable depth of cut, spindle speed and feed rate that will be chosen during machining. If thus parameters are not considered, this can provoke abnormal tool behavior such as chatter. Chatter will limit the tool life which only can be use for just a few times. To predict the chatter occurs, the parameters will be use are spindle speed, depth of cut and feed rate. CNC machine will be use. This process will base on dynamic cutting force model for ball end milling. The selections of cutting tool are depends on the process that will done where the chatter can be observed during this machining process. Cold work tool steel (AISI-D2) chosen as a material and its parameter is 100x100x25 mm. Cutter used was high speed steel 2 flute ball nose. Force dynamometer will be use to measure force and 27 tests will be done to observe the chatter occur. Analysis done by referring the result that measured by force dynamometer. The chatter in ball end milling can be detected from the calculated cutting forces and their frequency spectra. A comparison of the predicted and measured cutting forces demonstrated that the proposed method provides accurate results.