Normal view MARC view ISBD view

Analysis of control methods for buck DC-DC converter / Norsyafiera Nawang

By:

Norsyafiera Nawang

Material type: Text

TextPublication details: Kuantan, Pahang : UMP, 2012Description: xiv, 40 p. : ill. ; 30 cm. + 1 CD-ROMISBN:

THE0007028(Local)

Subject(s):

Dissertation note: Project paper (Bachelor of Electrical Engineering (Power system)) -- Universiti Malaysia Pahang - 2012 Abstract: A DC to DC converter is an electronic circuit which converts a source of direct current (DC) from one voltage level to another. There are three main topologies of converters which are buck converter, boost converter and buck-boost converter. This project is focus on Buck dc-dc converter using the hysteresis, PID and three-level hysteresis controllers. The buck dc-dc converter used to step down the input dc voltage from 24V to 12V. The hysteresis, PID and three-level hysteresis controllers are applied to control the switching of the switching device in buck converter so that the output voltage can be maintained 12V. The PID controller is the most common used in feedback control. The good output voltage can be obtained by well-tuning the P, I and D gains. The hysteresis control is a simplest method and inexpensive and easy in designing. The hysteresis band is derived from the converter current to predict the output voltage after the switching action. The term PID is defined as P for proportional, I for integral and D for derivative. The complete converter circuit is designed and implemented in MATLAB Simulink software. The analyses are carried out by make a comparison of the output voltage and load changes for all controllers.

Tags from this library: No tags from this library for this title. Log in to add tags.

Average rating: 0.0 (0 votes)

Holdings ( 2 )
Title notes ( 3 )

Holdings
Item type	Current library	Call number	Copy number	Status	Date due	Barcode
Final Year Report	UMPLIB PEKAN	TK7881.15 .N67 2012 rs Bc. (Browse shelf(Opens below))	1	Not for loan		0000071336
Final Year Report	UMPLIB PEKAN	CD 6753 \| TK7881.15 .N67 2012 rs Bc. (Browse shelf(Opens below))	1	Not for loan		0000071337

Project paper (Bachelor of Electrical Engineering (Power system)) -- Universiti Malaysia Pahang - 2012

Bibliography: p. 40-41

A DC to DC converter is an electronic circuit which converts a source of direct current (DC) from one voltage level to another. There are three main topologies of converters which are buck converter, boost converter and buck-boost converter. This project is focus on Buck dc-dc converter using the hysteresis, PID and three-level hysteresis controllers. The buck dc-dc converter used to step down the input dc voltage from 24V to 12V. The hysteresis, PID and three-level hysteresis controllers are applied to control the switching of the switching device in buck converter so that the output voltage can be maintained 12V. The PID controller is the most common used in feedback control. The good output voltage can be obtained by well-tuning the P, I and D gains. The hysteresis control is a simplest method and inexpensive and easy in designing. The hysteresis band is derived from the converter current to predict the output voltage after the switching action. The term PID is defined as P for proportional, I for integral and D for derivative. The complete converter circuit is designed and implemented in MATLAB Simulink software. The analyses are carried out by make a comparison of the output voltage and load changes for all controllers.