Normal view MARC view ISBD view

Experimental and analytical evaluation of bending for aluminum / Nazrith Zulkafli

By:

Nazrith Zulkafli

Material type: Text

TextPublication details: Kuantan, Pahang : UMP, 2012Description: xviii, 81 p. : ill. (some col.) ; 30 cm + 1 CD-ROMISBN:

THE0007712(Local)

Subject(s):

Dissertation note: Project paper (Bachelor of Mechanical Engineering) -- Universiti Malaysia Pahang - 2012 Abstract: Spring-back is a common phenomenon that occurs in sheet metal bending after unloading the tooling or punch due to material elastic recovery. Three different thicknesses, 1, 2 and 3 mm are selected and 0o, 45o and 90o of orientation are chosen as the considered parameters while the 30o is selected as reference bending angle. In this research, it studies about determining the spring-back angle by using experimental and analytical method. Different equations are use where the Daw-Kwei Leu equation as the first equation is considers the thickness poisson ratio and strain hardening exponent while the Dongye Fei and Peter Hodgson equation is only consider the thickness effect, poisson ratio and die width for spring-back. Experiment for bending is limited in bottoming v-die bending. Data from the tensile test are used in determining the spring-back value for analytical method while press brake machine is a tool to complete the test. As the finding of the research, increasing the sheet thickness is decrease the spring-back value for analytical and experiment. In experiment, 1 mm and 2 mm gain a decreasing spring-back value related with analytical and previous study, but 3 mm of thickness has a spring-go appearance where the outer layer of outer diameter is happened a crack and this is proved the result where the material already exceed the elastic region for the aluminum.

Tags from this library: No tags from this library for this title. Log in to add tags.

Average rating: 0.0 (0 votes)

Holdings ( 2 )
Title notes ( 3 )

Holdings
Item type	Current library	Call number	Copy number	Status	Date due	Barcode
Final Year Report	UMPLIB PEKAN	TS250 .N39 2012 rs Bc. (Browse shelf(Opens below))	1	Not for loan		0000072803
Final Year Report	UMPLIB PEKAN	CD 6929 \| TS250 .N39 2012 rs Bc. (Browse shelf(Opens below))	1	Not for loan		0000072804

Project paper (Bachelor of Mechanical Engineering) -- Universiti Malaysia Pahang - 2012

Bibliography : p. 60-61

Spring-back is a common phenomenon that occurs in sheet metal bending after unloading the tooling or punch due to material elastic recovery. Three different thicknesses, 1, 2 and 3 mm are selected and 0o, 45o and 90o of orientation are chosen as the considered parameters while the 30o is selected as reference bending angle. In this research, it studies about determining the spring-back angle by using experimental and analytical method. Different equations are use where the Daw-Kwei Leu equation as the first equation is considers the thickness poisson ratio and strain hardening exponent while the Dongye Fei and Peter Hodgson equation is only consider the thickness effect, poisson ratio and die width for spring-back. Experiment for bending is limited in bottoming v-die bending. Data from the tensile test are used in determining the spring-back value for analytical method while press brake machine is a tool to complete the test. As the finding of the research, increasing the sheet thickness is decrease the spring-back value for analytical and experiment. In experiment, 1 mm and 2 mm gain a decreasing spring-back value related with analytical and previous study, but 3 mm of thickness has a spring-go appearance where the outer layer of outer diameter is happened a crack and this is proved the result where the material already exceed the elastic region for the aluminum.