Normal view MARC view ISBD view

Development of a new type of sprayer head of a water mist system / Mohd Syazwan Zulkipli

By:

Mohd Syazwan Zulkipli

Material type: Text

TextPublication details: Kuantan, Pahang : UMP, 2012Description: xvi, 97 p. : ill. ; 30 cm. + 1 CD-ROMISBN:

THE0007425(Local)

Subject(s):

Spray nozzles

Dissertation note: Project paper (Bachelor of Mechanical Engineering (Automotive Engineering)) -- Universiti Malaysia Pahang – 2012 Abstract: Water mist heads are used in close areas to provide direct and constant mists of water for rapid cooling, watering plant, and fire extinguisher. Majority of the water mist’s types in the market has certain problem such as need high pressure and high water volume. Thus, the main aim of this study is to determine the best design of the water mist head. From literature review, the author identifies two parameters as a major concerned, i.e. pressure and flow rate. Three water mist’s head prototypes have been produced using RP machine. Then, the experimental works have been conducted with six test configurations, combination of three pressures and three diameters, to determine the mist patterns. For water pressure, the analysis is on 1.4, 1.8 and 2.2 kgforce and for diameter used in range 0.5, 1.0 and 1.5mm. The measured variables are the length of mist spread out from the nozzle. The result show that the optimum design is for the case 7.5mm at pressure 1.8bar and diameter 1.5mm for nozzle with designed internal flow and 20mm at pressure 2.2bar and diameter 1.0mm for nozzle with normal internal flow.

Tags from this library: No tags from this library for this title. Log in to add tags.

Average rating: 0.0 (0 votes)

Holdings ( 2 )
Title notes ( 3 )

Holdings
Item type	Current library	Call number	Copy number	Status	Date due	Barcode
Final Year Report	UMPLIB PEKAN	TP159.N6 S93 2012 rs Bc. (Browse shelf(Opens below))	1	Not for loan		0000076065
Final Year Report	UMPLIB PEKAN	CD 7294 \| TP159.N6 S93 2012 rs Bc. (Browse shelf(Opens below))	1	Not for loan		0000076066

Project paper (Bachelor of Mechanical Engineering (Automotive Engineering)) -- Universiti Malaysia Pahang – 2012

Bibliography : p. 79-81

Water mist heads are used in close areas to provide direct and constant mists of water for rapid cooling, watering plant, and fire extinguisher. Majority of the water mist’s types in the market has certain problem such as need high pressure and high water volume. Thus, the main aim of this study is to determine the best design of the water mist head. From literature review, the author identifies two parameters as a major concerned, i.e. pressure and flow rate. Three water mist’s head prototypes have been produced using RP machine. Then, the experimental works have been conducted with six test configurations, combination of three pressures and three diameters, to determine the mist patterns. For water pressure, the analysis is on 1.4, 1.8 and 2.2 kgforce and for diameter used in range 0.5, 1.0 and 1.5mm. The measured variables are the length of mist spread out from the nozzle. The result show that the optimum design is for the case 7.5mm at pressure 1.8bar and diameter 1.5mm for nozzle with designed internal flow and 20mm at pressure 2.2bar and diameter 1.0mm for nozzle with normal internal flow.