Normal view MARC view ISBD view

Optimization of cutting parameters and surface roughness on dry turning of low carbon steel / Lo Wei Hou

By:

Lo, Wei Hou

Material type: Text

TextPublication details: Kuantan, Pahang : UMP, 2012ISBN:

THE0005777(Local)

Subject(s):

Surface roughness

Dissertation note: Project paper (Bachelor of Mechanical Engineering) -- Universiti Malaysia Pahang - 2012 Abstract: Cutting fluid play a very important role in machining but it also brings a lot of detrimental effects such as health hazards and environmental pollutions when it handled improperly. In addition, the cutting fluids also increase the amount of machining cost since it had been issues lately of its cost frequently higher than the cost of cutting tools. With this issue, dry machining becomes one of the solutions to solve this problem. The objective of this project is to optimize the cutting parameters and surface roughness on dry machining. Material chosen to be perform in this study is low carbon steel AISI 1019. The experiment is carried out with a full factorial design of 3 cutting parameters with 3 levels each onto dry Lathe machining. The surface roughness of workpiece is measured by using perthometer and the result is analyzed statistical by using STATISTICA software version 7.1. The optimum cutting parameters and surface roughness can be investigated through the ANOVA prediction with a level of confident 95 percent. The result investigate can help the industries to solve the problem by applying the investigated values of parameters not only in reducing the machining cost but also present a more environmental friendly machining operation.

Tags from this library: No tags from this library for this title. Log in to add tags.

Average rating: 0.0 (0 votes)

Holdings ( 2 )
Title notes ( 3 )

Holdings
Item type	Current library	Call number	Copy number	Status	Date due	Barcode
Final Year Report	UMPLIB PEKAN	TA418.7 .L69 2012 rs Bc. (Browse shelf(Opens below))	1	Not for loan		0000072799
Final Year Report	UMPLIB PEKAN	CD 6927 \| TA418.7 .L69 2012 rs Bc. (Browse shelf(Opens below))	1	Not for loan		0000072800

Project paper (Bachelor of Mechanical Engineering) -- Universiti Malaysia Pahang - 2012

Bibliography : p. 69-70

Cutting fluid play a very important role in machining but it also brings a lot of detrimental effects such as health hazards and environmental pollutions when it handled improperly. In addition, the cutting fluids also increase the amount of machining cost since it had been issues lately of its cost frequently higher than the cost of cutting tools. With this issue, dry machining becomes one of the solutions to solve this problem. The objective of this project is to optimize the cutting parameters and surface roughness on dry machining. Material chosen to be perform in this study is low carbon steel AISI 1019. The experiment is carried out with a full factorial design of 3 cutting parameters with 3 levels each onto dry Lathe machining. The surface roughness of workpiece is measured by using perthometer and the result is analyzed statistical by using STATISTICA software version 7.1. The optimum cutting parameters and surface roughness can be investigated through the ANOVA prediction with a level of confident 95 percent. The result investigate can help the industries to solve the problem by applying the investigated values of parameters not only in reducing the machining cost but also present a more environmental friendly machining operation.