Normal view MARC view ISBD view

Wastewater treatment using combination of stainless steel membrane and adsorption system / Siti Sarrah Binti Ridzuan

By:

Siti Sarrah Ridzuan

Material type: Text

TextPublication details: Kuantan, Pahang : KUKTEM, 2006Description: 46 p. : ill. ; 30 cm. + 1 compter discISBN:

THE0003152(Local)

Subject(s):

Water -- Purification

Dissertation note: Project paper (Bachelor of Chemical Engineering) -- Kolej Universiti Kejuruteraan & Teknologi Malaysia - 2006 Summary: A fabricate design of combination membrane filtration and absorption system was used to treat palm oil waste to comply with standard B in regulation of environment act, 1974. This systems as adopted was found to be an efficient method to remove parameters in palm oil waste. The parameters that involves in this study are BOD (Biochemical Oxygen Demand), COD (Chemical Oxygen Demand), pH, TDS (Total Dissolve Solid) and turbidity. From this experiment, the comparison effectiveness between only using membrane filtration and using a combination of stainless steel membrane (membrane filtration) with adsorption columns (adsorption system) can be proven. The adsorbents used in the columns were activated carbon, activated alumina, rice husk and wood waste. The best types of adsorption columns can be determine from this experiment. The columns having a diameter of 6 cm with bed depth 500 cm could treat COD and BOD at average 81.3 % and 79.55%. Effect of flow rate, blank concentration and amount adsorb were studied

Tags from this library: No tags from this library for this title. Log in to add tags.

Average rating: 0.0 (0 votes)

Holdings ( 2 )
Title notes ( 2 )

Holdings
Item type	Current library	Call number	Copy number	Status	Date due	Barcode
Final Year Report	UMPLIB GAMBANG	TD430 .S27 2006 rs Thesis (Browse shelf(Opens below))	1	Not for loan		0000021614
Final Year Report	UMPLIB GAMBANG	CD 2073 \| TD430 .S27 2006 rs Thesis (Browse shelf(Opens below))	1	Not for loan		0000021615

Project paper (Bachelor of Chemical Engineering) -- Kolej Universiti Kejuruteraan & Teknologi Malaysia - 2006

A fabricate design of combination membrane filtration and absorption system was used to treat palm oil waste to comply with standard B in regulation of environment act, 1974. This systems as adopted was found to be an efficient method to remove parameters in palm oil waste. The parameters that involves in this study are BOD (Biochemical Oxygen Demand), COD (Chemical Oxygen Demand), pH, TDS (Total Dissolve Solid) and turbidity. From this experiment, the comparison effectiveness between only using membrane filtration and using a combination of stainless steel membrane (membrane filtration) with adsorption columns (adsorption system) can be proven. The adsorbents used in the columns were activated carbon, activated alumina, rice husk and wood waste. The best types of adsorption columns can be determine from this experiment. The columns having a diameter of 6 cm with bed depth 500 cm could treat COD and BOD at average 81.3 % and 79.55%. Effect of flow rate, blank concentration and amount adsorb were studied