Normal view MARC view ISBD view

Toughness investigation on ferrous-nonferrous weld metal joint (galvanized iron-aluminium alloy) / Muhammad Fakhrul Hashim

By:

Muhammad Fakhrul Hashim

Material type: Text

TextPublication details: Kuantan, Pahang : UMP, 2013Description: xv, 64 p. : ill. (some col.) ; 30 cm. + 1 CD-ROMISBN:

THE0005694(Local)

Subject(s):

Dissertation note: Project paper ( Bachelor of Mechanical Engineering) -- Universiti Malaysia Pahang - 2013 Abstract: Dissimilar metal welding is still a new field that need more scientific research in order to apply in industry. This thesis deals in study and finding the toughness of welded of galvanized iron and aluminium alloy. The objective of this study are to investigate of toughness of dissimilar metal welding between galvanized iron (GI) and aluminium alloy (AA1100) and also to study optimize parameters of dissimilar metal welding by using aluminium filler AA5356 using Taguchi method. Nine experiments need to be conducted, and then toughness, hardness and microstructure test were conducted. The parameters used are current (110 A, 115 A, 120 A), voltage (17V, 18 V, 19 V), speed (3 mm/s, 4 mm/s, 5 mm/s) and angle (0°, 15°, 35°). From the result, it can be seen that current is the most influential parameter followed by speed and voltage in toughness and also based on Taguchi analysis, the optimize parameter is Current (115 A), Voltage (17 V) and Speed (5 mm/s), this optimize parameter were verified through confirmation experiment. The Regression analysis shows the equation of toughness strength. The microstructure observation shows common defects happen on dissimilar metal welding.

Tags from this library: No tags from this library for this title. Log in to add tags.

Average rating: 0.0 (0 votes)

Holdings ( 2 )
Title notes ( 3 )

Holdings
Item type	Current library	Call number	Copy number	Status	Date due	Barcode
Final Year Report	UMPLIB PEKAN	TA405 .F35 2013 rs Bc. (Browse shelf(Opens below))	1	Not for loan		0000086358
Final Year Report	UMPLIB PEKAN	CD 8120 \| TA405 .F35 2013 rs Bc. (Browse shelf(Opens below))	1	Not for loan		0000086359

Project paper ( Bachelor of Mechanical Engineering) -- Universiti Malaysia Pahang - 2013

Bibilography : p. 63-64

Dissimilar metal welding is still a new field that need more scientific research in order to apply in industry. This thesis deals in study and finding the toughness of welded of galvanized iron and aluminium alloy. The objective of this study are to investigate of toughness of dissimilar metal welding between galvanized iron (GI) and aluminium alloy (AA1100) and also to study optimize parameters of dissimilar metal welding by using aluminium filler AA5356 using Taguchi method. Nine experiments need to be conducted, and then toughness, hardness and microstructure test were conducted. The parameters used are current (110 A, 115 A, 120 A), voltage (17V, 18 V, 19 V), speed (3 mm/s, 4 mm/s, 5 mm/s) and angle (0°, 15°, 35°). From the result, it can be seen that current is the most influential parameter followed by speed and voltage in toughness and also based on Taguchi analysis, the optimize parameter is Current (115 A), Voltage (17 V) and Speed (5 mm/s), this optimize parameter were verified through confirmation experiment. The Regression analysis shows the equation of toughness strength. The microstructure observation shows common defects happen on dissimilar metal welding.