Normal view MARC view ISBD view

Modal analysis on different type of aluminium, joined by tig welding / Aziee Edna Diawati Hazwan

By:

Aziee Edna Diawati Hazwan

Material type: Text

TextPublication details: Kuantan, Pahang : UMP , 2013Description: xiv, 57 p. : ill. (some col.) ; 30 cm. + 1 CD-ROMISBN:

THE0007672(Local)

Subject(s):

Dissertation note: Project paper (Bachelor of Mechanical Engineering)-- Universiti Malaysia Pahang - 2013 Abstract: Experimental Modal Analysis and Finite Element Analysis will be used to study the dynamic characteristic of a TIG welded joint between aluminium 1100 and aluminium 6061. The structural three-dimensional solid modelling of joining between aluminium 1100 and aluminium 6061 by TIG welding was developed using the SOLIDWORK drawing software. The finite element analysis was then performed in ALGOR software. The finite element model of the components was analyzed using the linear modal analysis approach and the experimental modal analysis was performed by using an Impact Hammer. Finally, an operating deflection shape analysis was carried out to investigate the dominant mode shape under a given operating condition. The natural frequency of the mode shape is determined and comparative study of modal analysis and finite element analysis was done from both method results. The comparison between natural frequencies of finite element modelling and model testing shows the closeness of the results. From the results, the percentage error had been determined. The percentage error is bit high because there are some errors occur during the experimental modal analysis. The experimental modal analysis is conducted with free boundary condition and the effect of damping which effect test rig by using sponge as a base of the plate is a factors as the higher percentage error. The result from the operating deflection shape analysis shows that mode two is the dominant mode shape with an operating frequency of 581 Hz.

Tags from this library: No tags from this library for this title. Log in to add tags.

Average rating: 0.0 (0 votes)

Holdings ( 2 )
Title notes ( 3 )

Holdings
Item type	Current library	Call number	Copy number	Status	Date due	Barcode
Final Year Report	UMPLIB PEKAN	TS227 .A95 2013 r Bc. (Browse shelf(Opens below))	1	Not for loan		0000086326
Final Year Report	UMPLIB PEKAN	CD 8104 \| TS227 .A95 2013 r Bc. (Browse shelf(Opens below))	1	Not for loan		0000086327

Project paper (Bachelor of Mechanical Engineering)-- Universiti Malaysia Pahang - 2013

Bibliography : p. 54-55

Experimental Modal Analysis and Finite Element Analysis will be used to study the dynamic characteristic of a TIG welded joint between aluminium 1100 and aluminium 6061. The structural three-dimensional solid modelling of joining between aluminium 1100 and aluminium 6061 by TIG welding was developed using the SOLIDWORK drawing software. The finite element analysis was then performed in ALGOR software. The finite element model of the components was analyzed using the linear modal analysis approach and the experimental modal analysis was performed by using an Impact Hammer. Finally, an operating deflection shape analysis was carried out to investigate the dominant mode shape under a given operating condition. The natural frequency of the mode shape is determined and comparative study of modal analysis and finite element analysis was done from both method results. The comparison between natural frequencies of finite element modelling and model testing shows the closeness of the results. From the results, the percentage error had been determined. The percentage error is bit high because there are some errors occur during the experimental modal analysis. The experimental modal analysis is conducted with free boundary condition and the effect of damping which effect test rig by using sponge as a base of the plate is a factors as the higher percentage error. The result from the operating deflection shape analysis shows that mode two is the dominant mode shape with an operating frequency of 581 Hz.