Geotechnical and morphological properties of row and prosessed Bukit Goh bauxite / by Tam Weng Loong
Material type:
TextPublication details: Kuantan, Pahang : UMP, 2017Description: xvi, 65 p. : ill. (some col.) ; 30 cm. + 1 CD ROMISBN: - THE0000753(Local)
| Item type | Current library | Call number | Copy number | Status | Date due | Barcode | |
|---|---|---|---|---|---|---|---|
Final Year Report
|
UMPLIB GAMBANG | FKASA .T3694 2017 r Bc. (Browse shelf(Opens below)) | 1 | Not for loan | 0000117506 | ||
|
Final Year Report
|
UMPLIB GAMBANG | CD 10657 | FKASA .T3694 2017 r Bc. (Browse shelf(Opens below)) | 1 | Not for loan | 0000117507 |
Faculty of Civil Engineering and Earth Resources
Project Paper (Bachelors of Civil Engineering) -- University Malaysia Pahang – 2017
Bibliography : p. 64-65
This study focus on the differences of geotechnical properties between raw and processed Bukit Goh bauxite. As bauxite material has high clay content which mostly composed of silicate minerals, it has high risk to cause cargo liquefaction which in turn causes catastrophic incident. This paper includes the analysis of raw and processed bauxite where its fine particle contents has been minimized using beneficiation method to reduce the risk of liquefaction by referring to the International Maritime Solid Bulk Cargoes Code (IMSBC Code) standard. To analyze these characteristics of the bauxite, five samples were selected at Bukit Goh, Kuantan; three of the samples from the Bukit Goh mine and two samples from stock pile were tested to identify the bauxite geotechnical properties by referring to GEOSPEC 3: Model Specification for Soil Testing; particle size distribution, moisture content, specific gravity, morphological properties as well as its elemental and oxide properties. Laboratory tests involved including Small Pycnometer test, Dry Sieve test, Specific Gravity test, X-ray fluorescence test (XRF) and Field emission scanning electron microscopy test (FESEM). The results show that average moisture content of raw bauxite is 24.81% which exceeded the recommended value of maximum 10% while the average moisture content of processed bauxite is only 6.69%. The average fine material for raw bauxite is 38.40% which should not be greater than 30% per IMSBC standard while for processed bauxite is 21.40%. From the FESEM image, it was clearly shown that the fine particles of processed bauxite is lesser than raw bauxite. In conclusion, the quality and safety of processed bauxite is better than raw bauxite.