Normal view MARC view ISBD view

Modelling and simulation of side milling using finite element analysis [electronic resource] / Wong Choon Fuan

By:

Wong, Choon Fuan

Material type:

Computer filePublication details: Kuantan, Pahang : UMP, 2016Description: 1 computer disc : digital data ; 12 cmISBN:

THE0005091(Local)

Subject(s):

Online resources:

Access in library only

Dissertation note: Project Paper (Bachelor of Engineering in Manufacturing Engineering (Hons.)) -- Universiti Malaysia Pahang – 2016 Abstract: This project deals with modelling and simulation of side milling using Finite Element Analysis. The objective of this thesis is to validate the cutting force result between simulation and experiment. It describes how the finite element analysis predicts the cutting force before the machining process is proceeded. The data obtained in this project were cutting force and stress during the side milling process. Machining parameters such as cutting speed, feed rate, spindle speed were also studied. The cutting force and stress prediction was done by using finite element analysis software called ABAQUS. The finite element analysis was analyzed based on the interaction between aluminium 6061 work piece and high speed steel tool cutter. The cutting forces were measured by using dynamometer during the side milling process. The machining parameters were calculated before the experiment started. Finally, the cutting force in the three directions which is X, Y and Z direction versus time was measured and recorded in the data acquisition software which is Dyno-ware. From the results of dynamometer, noise has been eliminated to get the certain time period of cutting force. The results between simulation and experiment indicates that the predicted and the measured cutting force of milling process are in a good agreement.

Tags from this library: No tags from this library for this title. Log in to add tags.

Average rating: 0.0 (0 votes)

Holdings ( 1 )
Title notes ( 5 )

Holdings
Item type	Current library	Call number	Copy number	Status	Date due	Barcode
Final Year Report	UMPLIB PEKAN	FKP .W66 2016 r Bc. \| CD 10420 (Browse shelf(Opens below))	1	Not for loan		0000115935

Faculty of Manufacturing Engineering

Theses Gred B

Project Paper (Bachelor of Engineering in Manufacturing Engineering (Hons.)) -- Universiti Malaysia Pahang – 2016

This project deals with modelling and simulation of side milling using Finite Element Analysis. The objective of this thesis is to validate the cutting force result between simulation and experiment. It describes how the finite element analysis predicts the cutting force before the machining process is proceeded. The data obtained in this project were cutting force and stress during the side milling process. Machining parameters such as cutting speed, feed rate, spindle speed were also studied. The cutting force and stress prediction was done by using finite element analysis software called ABAQUS. The finite element analysis was analyzed based on the interaction between aluminium 6061 work piece and high speed steel tool cutter. The cutting forces were measured by using dynamometer during the side milling process. The machining parameters were calculated before the experiment started. Finally, the cutting force in the three directions which is X, Y and Z direction versus time was measured and recorded in the data acquisition software which is Dyno-ware. From the results of dynamometer, noise has been eliminated to get the certain time period of cutting force. The results between simulation and experiment indicates that the predicted and the measured cutting force of milling process are in a good agreement.

Item in PDF format