Normal view MARC view ISBD view

Flexural strength of concrete beam by using wood block as aggregate replacement / Nur Affini Azmi

By:

Nur Affini Azmi [author.]

Material type: Text

text
text

Media type:

unmediated
computer

Carrier type:

volume
computer disc

ISBN:

THE0008095(Local)

Subject(s):

Dissertation note: Project Paper (Bachelors of Civil Engineering) -- Universiti Malaysia Pahang – 2019 Abstract: Nowadays, the demand for the concrete industry is raising consequent with the developing of new house property. The effect of the property industry may cause of demand in natural aggregate. It will issue to the all quarries industry to fulfil the market demand. Thus, alternative to deal with market demand by replacing the natural coarse aggregate with the waste wood block from factory. The study was conducted by using wood block as replacement of coarse aggregate. The study was involved by produce the beam size 150 mm x 200 mm x 1500 mm and cube specimen size 150 mm x 150 mm x 150 mm. The specimen was casting with different percentage of wood block replacement which is 3% and 6%. For the precaution, wood block was paint at the surface area to avoid water absorption. The test was carrying out for cube specimen was a compressive strength and for the beam was flexural test. By comparing the performance of the compressive strength for replacing 3% and 6% of wood block, it can be conclude to use 6% as a replacement for coarse aggregates based on the average compressive strength for 7 days which is 23.24 N/mm2.

Tags from this library: No tags from this library for this title. Log in to add tags.

Average rating: 0.0 (0 votes)

Holdings ( 2 )
Title notes ( 4 )

Holdings
Item type	Current library	Collection	Call number	Status	Date due	Barcode
Thesis	UMPLIB GAMBANG Reference	Reference	FKASA .A34 2019 r Bc. (Browse shelf(Opens below))	Not for loan		T000000255
Thesis	UMPLIB GAMBANG		CD 12298 (Browse shelf(Opens below))	Not for loan		T000000256

Faculty of Civil Engineering and Earth Resources

Project Paper (Bachelors of Civil Engineering) -- Universiti Malaysia Pahang – 2019

Includes bibliographical references

Nowadays, the demand for the concrete industry is raising consequent with the developing of new house property. The effect of the property industry may cause of demand in natural aggregate. It will issue to the all quarries industry to fulfil the market demand. Thus, alternative to deal with market demand by replacing the natural coarse aggregate with the waste wood block from factory. The study was conducted by using wood block as replacement of coarse aggregate. The study was involved by produce the beam size 150 mm x 200 mm x 1500 mm and cube specimen size 150 mm x 150 mm x 150 mm. The specimen was casting with different percentage of wood block replacement which is 3% and 6%. For the precaution, wood block was paint at the surface area to avoid water absorption. The test was carrying out for cube specimen was a compressive strength and for the beam was flexural test. By comparing the performance of the compressive strength for replacing 3% and 6% of wood block, it can be conclude to use 6% as a replacement for coarse aggregates based on the average compressive strength for 7 days which is 23.24 N/mm2.