<?xml version="1.0" encoding="UTF-8"?>
<mods xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://www.loc.gov/mods/v3" version="3.1" xsi:schemaLocation="http://www.loc.gov/mods/v3 http://www.loc.gov/standards/mods/v3/mods-3-1.xsd">
  <titleInfo>
    <title>Strength of soft clay reinforced with crushed coconut shell columns</title>
  </titleInfo>
  <name type="personal">
    <namePart>Ieszaliana Binti Ali</namePart>
    <role>
      <roleTerm authority="marcrelator" type="text">creator</roleTerm>
    </role>
    <role>
      <roleTerm type="text">author.</roleTerm>
    </role>
  </name>
  <typeOfResource manuscript="yes">text</typeOfResource>
  <originInfo>
    <place>
      <placeTerm type="code" authority="marccountry">my</placeTerm>
    </place>
    <dateIssued encoding="marc">2024</dateIssued>
    <copyrightDate encoding="marc">2024</copyrightDate>
    <issuance>monographic</issuance>
  </originInfo>
  <language>
    <languageTerm authority="iso639-2b" type="code">eng</languageTerm>
  </language>
  <physicalDescription>
    <extent>xiv ,168 pages : illustrations (some color) ; 30 cm. + 1-CD ROM</extent>
  </physicalDescription>
  <abstract>Stone columns could be used as a ground improvement technique by replacing a portion of soft  soil with granular material such as stone or sand. The benefits of using stone columns in lowstrength soil have been proven to be an efficient method in improving the bearing capacity and  reducing the settlement of soft soils. This research used the laboratory scale model to investigate  the role of crushed coconut shell columns in enhancing the shear strength of the soft reconstituted  kaolin clay. The shear strength characteristics can be obtained by determining the effect of area  replacement ratio, height penetration ratio, and volume replacement on crushed coconut shell  columns. Reinforced kaolin samples were tested with an Unconfined Compression Test (UCT)  and an Unconsolidated Undrained Triaxial Test (UU). The specimens used were 50 mm in  diameter with a height of 100 mm and weights 312.4 g. The research variables were height  penetration ratios of 0.6, 0.8, and 1.0 with crushed coconut shell columns with diameters of 10  mm, 12 mm, and 16 mm. The kaolin sample without reinforcement of crushed coconut shell  columns was the controlled sample. The highest improvement of shear strength of crushed  coconut shell columns on area replacement ratio of 4.00% at 10 mm diameter columns was at 0.8  height penetration ratio with 73.42%, whilst for area replacement ratio of 5.76% at 12 mm  diameter columns, the highest was also at 0.8 height penetration ratio with 66.82%. Meanwhile,  the highest improvement of shear strength of the crushed coconut shell column for the area  replacement ratio of 10.24% at 16 mm diameter columns was at 0.8 height penetration ratio with  22.32%. The maximum shear strength improvement was at 0.8 height penetration ratio for all  crushed coconut shell columns. The Unconsolidated Undrained (UU) test showed a significant  improvement in cohesion, c, which was recorded to be from 22.3% to 66.23%. Meanwhile, the  friction angle, ϕ, increased from 0% to 50.15%. The UU test results were almost identical to the  UCT results, where the highest improvement occurred at 0.8 penetration height ratio for a 10 mm  diameter column. The correlation obtained the coefficient value of determination ranging from  0.8 to 1. The very strong correlation between area replacement ratios against shear strength  proved that the most controlling parameter the in the shear strength of soft clay is area  replacement ratio. In conclusion, crushed coconut shell columns positively increase the shear  strength and can be implemented to reduce dependence on natural materials, maximize the  potential for renewable materials, and minimize waste.</abstract>
  <targetAudience authority="marctarget">specialized</targetAudience>
  <note type="statement of responsibility">Ieszaliana Binti Ali</note>
  <note>Faculty of Civil Engineering Technology</note>
  <note>Thesis (Master of Science) -- Universiti Malaysia Pahang – 2024</note>
  <note>Include bibliographical reference</note>
  <subject authority="lcsh">
    <name type="corporate">
      <namePart>Faculty of Civil Engineering Technology</namePart>
    </name>
    <topic>Dissertations</topic>
  </subject>
  <subject authority="lcsh">
    <topic>Universities and colleges</topic>
    <topic>Dissertations</topic>
  </subject>
  <subject authority="lcsh">
    <topic>Theses</topic>
    <topic>Dissertations</topic>
  </subject>
  <identifier type="isbn">THE0009856 (Local)</identifier>
  <recordInfo>
    <recordContentSource authority="marcorg">UMPSA</recordContentSource>
    <recordCreationDate encoding="marc">240528</recordCreationDate>
    <recordChangeDate encoding="iso8601">20251125110858.0</recordChangeDate>
    <languageOfCataloging>
      <languageTerm authority="iso639-2b" type="code">eng</languageTerm>
    </languageOfCataloging>
  </recordInfo>
</mods>
