03232ntm a2200349 i 4500 MY-KuUP 20260605124403.0 t||||fr|||| 000 0 ta 260605t20242024my a|||fr|||| 000 0 eng d THE0010546 (Local) Hardback UMPSA eng UMPSA rda FTKKP .A84 2024 r Bc. Nur Athya Binti Mat Daud @ Mohd Daud, author. Optimization of photocatalytic degradation of methylene blue using fe/kcc-1 derived from palm oil fuel ash / Nur Athya Binti Mat Daud @ Mohd Daud Kuantan, Pahang : UMPSA, 2024 © 2024 xi, 47 pages : illustrations ; rdacontent text rdamedia unmediated rdacarrier volume rda text file PDF Faculty of Chemical and Process Engineering Technology Final Year Report (Bachelor of Chemical Engineering Technology) -- Universiti Malaysia Pahang Al-Sultan Abdullah - 2024 Include bibliographical reference The goal of this work is to optimise the photocatalytic degradation of methylene blue (MB) using a novel catalyst called Fe/KCC-1 that is made from palm oil furl ash (POFA). The catalyst is made by incorporating iron (Fe) into mesoporous KCC-1. The aim is to maximise photocatalytic performance by using Fe's catalytic properties along with KCC-1's wide surface area. By employing POFA as a sustainable precursor in the synthesis process, environmentally conscious procedures are used. The objectives of this study are to investigate the optimum condition of MB degradation onto Fe/KCC-1(POFA) by Response Surface Methodology (RSM) and evaluate the reusability of MB degradation onto Fe/KCC-1(POFA) at optimum conditions. Through a methodical investigation of critical factors which are catalyst dosage, initial MB concentration, and pH solution, the photocatalytic degradation of MB is optimised. The experimental results are examined to see how each parameter influences the efficiency of MB degradation. Based on the optimisation results, pH solution is the most significant factor affecting MB degradation, and there is a strong correlation between pH and MB removal efficiency. To ascertain Fe/KCC-1(POFA)'s long-term viability, ascertain its recyclability. Reusability without appreciable performance loss is indicated by strong stability. In short, the goal of the study is to maximise the photocatalytic degradation of MB by using Fe/KCC-1 from POFA. To improve the efficiency, variables like MB initial concentration, pH solution, and catalyst dosage are investigated. The results showed that a catalyst dosage of 3 g/L, a pH of 6, and an initial MB concentration of 10 mg/L are the ideal values. The study also discovered that a critical element influencing the photocatalytic process is the pH solution. Through this study too, Fe/KCC-1(POFA) can be reactivated 3 times. Faculty of Chemical and Process Engineering Technology Dissertations Universities and colleges Dissertations Theses Dissertations https://umpir.ump.edu.my/id/eprint/47294 lcc PSM 0 0 lcc 0 0 10000 10000 2026-06-05 0 FTKKP .A84 2024 r Bc. T000004217 2026-06-05 12:44:23 2026-06-05 PSM 104933 104939