02179nam a2200241 a 4500 vtls000045106 KUKTEM 20251114204422.0 100208t2009 my a f m 000 0 eng d THE0004195(Local) 201905141750 farhana 201107132306 VLOAD 201002081444 kam 201002081218 kam UMP TP156.S45 N87 2009 rs Bc. Nurulhuda Kasim Separation technique of crude palm oil at clarification area via optimum parameters / Nurulhuda Binti Kasim Separation technique of crude palm oil at clarification area via optimum parameters [electronic resource] Kuantan : UMP, 2009 92 p. : ill. (some col.) ; 30 cm. + 1 computer disc Project paper (Bachelor of Chemical Engineering) -- Universiti Malaysia Pahang - 2009 The purpose of clarification is to separate the oil from its entrained impurities such as water, cell debris, fibrous material and non oily solid (N.O.S). In this study, optimum parameter such as temperature, effect of impeller, residence time and separation technique of crude palm oil is at clarification stage is determined. By using correct separation technique and condition, mill can maximize oil production and reduce oil losses. In this experimental, CPO are heated at 50°C, 60°C, 70°C, 80°C, 90°C, 110°C and 120°C for optimum temperature determination using water shaker batch. Experimentally, the results proved that by using 95°C for heating, CPO took the shortest time for separation. Difference size beakers also tested while separation. As larger the surface area of beaker, shorter time is taken for CPO separation. Otherwise the volume of CPO is directly proportional to the separation time. The present of impeller also enhances the separation of oil and sludge thus reduced the oil content in underflow while the pure oil obtained is increased. Separation (Technology) 0 0 0 1 10000 10000 2019-09-04 0 TP156.S45 N87 2009 rs Bc. 0000042811 2019-09-04 00:00:00 1 2019-09-04 PSM 0 0 0 1 20000 20000 2019-09-04 0 CD 3933 | TP156.S45 N87 2009 rs Bc. 0000042812 2019-09-04 00:00:00 1 2019-09-04 PSM VIRTUA40 1714 1720 VTLSSORT0080*0200*0400*0900*1000*2450*2460*2600*3000*5020*5200*6500*9992