01732nam a2200193 a 4500001001400000003000700014005001700021008004100038020002200079040000800101100002600109245008400135260002600219300004500245502010700290520110700397650001601504650001801520vtls000045122KUKTEM20251114204424.0100212t2009    my o   f m    000 0 eng d  aTHE0004300(Local)  aUMP0 aAhmad Syahrul Mohamad10aNatural gas dehydration using triethylene glycol (TEG) /cAhmad Syahrul Mohamad  aKuantan :bUMP,c2009  a49 p. :bcol. ill. ;c30 cm. +e1 CD-ROM  aProject paper (Bachelor of Chemical Engineering (Gas Technology)) -- Universiti Malaysia Pahang - 20093 aDehydration of natural gas is the process removal of the water that is associated with natural gases. The objectives of this experiment is to remove water content in natural gas by using triethylene glycol (TEG).The mixtures of water in natural gas can cause the problems for the production operation, transportation, storage and use of the gas.  The four major methods of dehydration are absorption, adsorption, gas permeation and refrigeration. The process of dehydration by using TEG is absorption, involves the use of a liquid desiccant to remove water content from the gas. This research focused on the effect of operating pressure and volumetric flowrate of natural gas. Before that, the engineering works was applied in order to make dehydration unit for the experimental of dehydration such as designing, fabricate and testing. From the result of experimental, the highest amount water content was removed when the operating pressure at lowest and the volumetric flowrate at highest. Higher amount of water content can be removed in the future study by carrying out the better dehydration unit. 0aNatural gas 0aGasesxDrying