01756nam a2200205 a 4500001001400000003000700014005001700021008004100038020002200079040000800101100002100109245009500130246009200225260003400317300006400351502008700415504002800502520099100530650002901521vtls000046004KUKTEM20251114204429.0100607t2009    my da  f m    000 0 eng d  aTHE0002746(Local)  aUMP0 aRozainah Ibrahim10aStudy on physical properties of ceramic filled as a roof coating /cRozainah Binti Ibrahim3 aStudy on physical properties of ceramic filled as a roof coatingh[electronic resource]  aKuantan, Pahang :bUMP,c2009  axii, 41 p. :bill. (some col.) ;c30 cm. +e1 computer disc  aProject paper (Bachelor of Civil Engineering) -- Universiti Malaysia Pahang - 2009  aBibliography : p. 39-413 aCeramic filled coating is a roof coating material that consist of ceramic and polymer. The function of this coating is not only as a heat-resistant but it also can deflect the sun’s rays thus lowering inside temperature dramatically. It’s also act like a sound resistance which lower sound levels in the building by filling cracks at the roof. In this study, it focused on choosing the optimum condition of the ceramic and polymer to be as a roof coating. This optimum condition can be determined by doing the tensile test. The maximum tensile stress was obtained using the sample with the 2.0% of ceramic added with 1kg of acrylic polymer. This proportion is best among the other samples because it gain maximum tensile stress (574.67 kN/m2) and maximum load (17.24 kN). Viscosity test being carried out in relationship with the curing time of the coating after being applied to the roof. The result of the viscosity is increasing with the value of the percentage of ceramic added. 0aCeramic coatingxTesting