02007nam a2200253 a 4500 vtls000046004 KUKTEM 20251114204429.0 100607t2009 my da f m 000 0 eng d THE0002746(Local) 201905280921 nazirah 201107132323 VLOAD 201006071103 ida UMP TA455.C43 R69 2009 rs Bc. Rozainah Ibrahim Study on physical properties of ceramic filled as a roof coating / Rozainah Binti Ibrahim Study on physical properties of ceramic filled as a roof coating [electronic resource] Kuantan, Pahang : UMP, 2009 xii, 41 p. : ill. (some col.) ; 30 cm. + 1 computer disc Project paper (Bachelor of Civil Engineering) -- Universiti Malaysia Pahang - 2009 Bibliography : p. 39-41 Ceramic filled coating is a roof coating material that consist of ceramic and polymer. The function of this coating is not only as a heat-resistant but it also can deflect the sun’s rays thus lowering inside temperature dramatically. It’s also act like a sound resistance which lower sound levels in the building by filling cracks at the roof. In this study, it focused on choosing the optimum condition of the ceramic and polymer to be as a roof coating. This optimum condition can be determined by doing the tensile test. The maximum tensile stress was obtained using the sample with the 2.0% of ceramic added with 1kg of acrylic polymer. This proportion is best among the other samples because it gain maximum tensile stress (574.67 kN/m2) and maximum load (17.24 kN). Viscosity test being carried out in relationship with the curing time of the coating after being applied to the roof. The result of the viscosity is increasing with the value of the percentage of ceramic added. Ceramic coating Testing 0 0 0 6 10000 10000 2019-09-04 0 TA455.C43 R69 2009 rs Bc. 0000046159 2019-09-04 00:00:00 1 2019-09-04 PSM 0 0 0 1 10000 10000 2019-09-04 0 CD 4380 | TA455.C43 R69 2009 rs Bc. 0000046160 2019-09-04 00:00:00 1 2019-09-04 PSM VIRTUA40 1899 1905 VTLSSORT0080*0200*0400*0900*1000*2450*2460*2600*3000*5020*5040*5200*6500*9992