02015ntm a2200253 a 4500 vtls000082977 KUKTEM 20251114204443.0 141104t2013 my da f m 000 0 eng d THE0006620(Local) 201905161256 amirul 201411041214 Fida 201411041208 Fida 201411041208 Fida UMP TJ1227 .M84 2013 r Bc. Nik Muhamad Firdaus Nik Salahuddin Modal analysis on cnc milling cutting tool / Nik Muhamad Firdaus Nik Salahuddin Kuantan, Pahang : UMP , 2013 xvii, 74 p. : ill. (some col.) ; 30 cm. + 1 CD-ROM Project paper (Bachelor of Mechanical Engineering) -- Universiti Malaysia Pahang - 2013 Bibliography : p. 72-73 To date, milling is one of the most common manufacturing process for manufacturing sectors, aerospace, and tool and dies industries. In this project, the main objective is to study the dynamic properties and behaviour of the CNC milling cutting tool. The method used is using finite element analysis and the validation of results obtained using experimental modal testing. Firstly, the structural threedimensional solid modelling of the selected CNC cutting tool draw before analysed using the linear modal analysis approach. After that, the experimental modal testing was performed using Modal Impact Hammer Testing method. The natural frequency of the mode shape is determined and comparative study was done from both method results. The results of this project shown the mode shape simulation of experimental data are totally not same but generally is in agreement with the finite element analysis. It is concluded that the experimental method uses vertical milling machines as test rig and the difference mass of cutting tool affected the result. Milling cutters Milling-machines 0 0 0 1 20000 20000 2019-09-04 0 TJ1227 .M84 2013 r Bc. 0000086382 2019-09-04 00:00:00 1 2019-09-04 PSM 0 0 0 1 20000 20000 2019-09-04 0 CD 8132 | TJ1227 .M84 2013 r Bc. 0000086383 2019-09-04 00:00:00 1 2019-09-04 PSM VIRTUA40 2318 2324 VTLSSORT0080*0200*0400*0900*1000*2450*2600*3000*5020*5040*5200*6500*6501*9992