02809nam a2200277 a 4500 vtls000045755 KUKTEM 20251114204450.0 100513t2009 my ao f m 000 0 eng d THE0006322(Local) 201905161250 aida 201107132014 VLOAD 201005131110 ida 201005131037 ida UMP TJ788 .A34 2009 rs Bc. Muhamad Akhbar Osman Md. Hashim Simulation of gaseous fuel injector geometries of mult holes nozzle by using CNG engine / Muhamad Akhbar Osman Bin Md. Hashim Simulation of gaseous fuel injector geometries of mult holes nozzle by using CNG engine [electronic resource] Kuantan, Pahang : UMP, 2009 xi, 61 p. : ill. (some col.) ; 30 cm. + 1 computer disc Project paper (Bachelor of Mechanical Engineering with Automotive Engineering) -- Universiti Malaysia Pahang - 2009 Bibliography : p. 49-51 Compressed natural gas (CNG) is the most preferred for fossil fuel substitution. This project is to study simulation of gaseous fuel injector geometries of multi-hole nozzle by using CNG engine. Three main components are focused on this paper. First, the relation between engine speed and injector pressure in achieving stoichiometric air-fuel mixture is investigated. Second, relation between valve lift and injector pressure in obtaining stoichiometric air-fuel mixture is investigated. Lastly the quality of air-fuel mixture in engine cylinder is investigated. Stoichiometric air-fuel mixture leads to good drivability, high combustion efficiency, and avoid internal damage on engine parts. In order to achieve stoichiometric air-fuel mixture, the different engine speeds and valve lift are considered and investigated. Therefore, Computational Fluid Dynamics (CFD) method using COSMOS FloWork simulation software is used for this purpose. The simulation of gaseous fuel injector geometries of multi-hole nozzle by using CNG engine is conducted in 1.78mm, 3.55mm, 5.33mm and 7.1mm intake valve lift, and also engine speeds at 2000 RPM, 3000 RPM, 4000 RPM and 5000 RPM. The results are shown; by increasing the engine speed, the injector pressure increases at different valve lift. Valve lift increment will increase the injector pressure for different engine speeds but the injector pressure is constant for valve lift increment from 75 percent to 100 percent. In the best trend air-fuel mixing result, the injected gas fuel and intake air has been mixed spread evenly in combustion chamber. Internal combustion engines Valves Compressed natural gas 0 0 0 1 20000 20000 2019-09-04 0 TJ788 .A34 2009 rs Bc. 0000044455 2019-09-04 00:00:00 1 2019-09-04 PSM 0 0 0 1 20000 20000 2019-09-04 0 CD 4251 | TJ788 .A34 2009 rs Bc. 0000044456 2019-09-04 00:00:00 1 2019-09-04 PSM VIRTUA40 2521 2527 VTLSSORT0080*0200*0400*0900*1000*2450*2460*2600*3000*5020*5040*5200*6500*6501*6502*9992