02511ntm a2200241 a 4500 vtls000083047 KUKTEM 20251114204451.0 141105t2013 my da f m 000 0 eng d THE0006515(Local) 201905141444 amirul 201411131327 training2 201411051024 training2 UMP TJ1185 .M84 2013 r Bc. Abdul Muhaimin Aris Experimental investigation of the minimum quantity lubrication in end-milling of AA6061T6 by coated carbide tools / Abdul Muhaimin Aris Kuantan, Pahang : UMP, 2013 xvi, 56 p. : ill. (some col.) ; 30 cm. + 1 CD-ROM Project Paper (Bachelor of Mechanical Engineering) -- Universiti Malaysia Pahang – 2013 Bibliography : p. 57-60 This report presents an experimental investigation on the effects of output parameters which are surface roughness, tool wear and material removal rate during machining aluminum alloy 6061-T6 using minimum quantity lubricant (MQL) technique. The minimum quantity of lubrication technique is becoming increasingly more popular due to the safety of environment. The cutting speed, depth of cut, feed rate and MQL flow rate are selected input parameters in this study. This experiment was conducted based on central composite design method. To develop a model of process optimization based on the response surface method. MQL parameters include nozzle direction in relation to feed direction, nozzle elevation angle, distance from the nozzle tip to the cutting zone, lubricant flow rate and air pressure. To achieve a maximum output parameters based on the optimized process parameters for coated carbide cutting tools (CTP 2235). The surface roughness was increased with decrease of cutting speed. The optimum cutting condition for MQL and flooded are obtained the feed rate, depth of cut, cutting speed and MQL flow rate are 379 mm/tooth, 2 mm, 5548.258 rpm and 0.333 ml/min respectively for MQL. The optimum cutting condition for flooded are obtained the feed rate, depth of cut, cutting speed and MQL flow rate are 379 mm/tooth, 2 mm and 5563.299 rpm respectively for flooded. It is seen that a majority of coated carbide inserts have a long tool wear when exposed to high cutting speed, and feed rate leading to breakage of the inserts. Machine tools and machining 0 0 0 1 20000 20000 2019-09-04 0 TJ1185 .M84 2013 r Bc. 0000086487 2019-09-04 00:00:00 1 2019-09-04 PSM 0 0 0 1 20000 20000 2019-09-04 0 CD 8183 | TJ1185 .M84 2013 r Bc. 0000086488 2019-09-04 00:00:00 1 2019-09-04 PSM VIRTUA40 2550 2556 VTLSSORT0080*0200*0400*0900*1000*2450*2600*3000*5020*5040*5200*6500*9992