01815nam a2200229 a 4500001001400000003000700014005001700021008004100038020002200079040000800101100002500109245007300134246006600207260003400273300006400307502011500371504002800486520097500514650004501489650001901534650003201553vtls000054758KUKTEM20251114204457.0110714t2010    my a   f m    000 0 eng d  aTHE0006684(Local)  aUMP0 aMohd Hanaffi Yaa'kob10aPower compensation by distributed generation /cMohd Hanaffi Yaa'kob3 aPower compensation by distributed generationh[computer file]  aKuantan, Pahang :bUMP,c2010  axii, 93 p. :bill. (some col.) ;c30 cm. +e1 computer disc  aProject paper (Bachelor of  Electrical Engineering (Hons.) (Power System) -- Universiti Malaysia Pahang - 2010  aBibliography : p. 58-593 aIn order to reduce electricity cost, together with improving the performance of distribution systems, it has to deal with the problem of power losses minimisation. Although losses in the system can never be entirely eliminated, they can be controlled and minimised in several ways for example by installing Distributed Generation (DG) and shunt capacitor. DG can reduce line losses, increase system voltage profile, and improve power quality of the system. The shunt capacitor can be improving the power factor if the installation DG affects the power factor of network system. In this thesis, the proposed method is tested on standard IEEE 14 bus system and the results of the simulation carried out using MATLAB. While, DIgSILENT software was used to simulate the 26-bus test system by. By adding the DG, the losses of the system will be reducing while it can stabilize the network system. Therefore, distributed generation has improved the overall system performance. 0aDistributed generation of electric power 0aElectric power 0aElectric power distribution