01662nam a2200229 a 4500001001400000003000700014005001700021008004100038020002200079040000800101100001900109245010000128246009900228260003400327300006500361502010600426504002800532520075000560650002901310650005201339650004101391vtls000054907KUKTEM20251114204503.0110720t2010    my a   f m    000 0 eng d  aTHE0005516(Local)  aUMP0 aMustaqim Hazmi10aAutomatic detection temperature transmitter for calibration process using RTD /cMustaqim Hazmi3 aAutomatic detection temperature transmitter for calibration process using RTDh[computer file]  aKuantan, Pahang :bUMP,c2010  axvii, 83 p. :bill. (some col.) ;c30 cm. +e1 computer disc  aProject paper (Bachelor of Electrical Engineering (Electronics)) -- Universiti Malaysia Pahang - 2010  aBibliography : p. 61-623 aThe purpose for this project is to detect temperature for Calibration Process using Resistive Thermal Device (RTD) automatically. This project will be used Visual Basics (VB) programmed to develop Graphical User Interface (GUI). An RTD will be use as temperature sensor in this Calibration Process. The software and the temperature sensor will be interfaced by using a Data Acquisition (DAQ) card. Proportional–Integral–Derivative (PID) controller will be purpose for automatic detection for temperature system. The expected result for this project is an automatic detection system for temperature measure during the Calibration Process. The accuracy of the measurement will be monitor beside the analysis of uncertainty and confidence limit 0aTemperature measurements 0aTemperature measuring  instrumentsxCalibration 0aResistance thermometersxCalibration