01899nam a2200193 a 4500001001400000003000700014005001700021008004100038020002200079040000800101100001900109245009300128260003400221300004400255502009100299504002800390520125800418650002901676vtls000058025KUKTEM20251114204507.0111227t2010    my da  f m    001 0 eng d  aTHE0002471(Local)  aUMP0 aSuhaili Sabdin10aUse of nanoparticle in the wood composite to enhance the heat transfer /cSuhaili Sabdin  aKuantan, Pahang :bUMP,c2010  axv, 80 p. :bill. ;c30 cm. +e1 CD-ROM  aProject paper (Bachelor of Chemical Engineering ) -- Universiti Malaysia Pahang - 2010  aBibliography : p. 45-473 aThe fast growing demand for engineered wood products and development of Medium Density Fiberboard (MDF) leads to numerous research focusing on process parameter and physical properties of the board. Using conventional process, Medium Density Fiberboard (MDF) is commonly made from wood fibers added with Urea Formaldehyde (UF) resin in a hot press process. Heat transfer is determine during the hot press by which the pressing time will leads to higher quality of the board. Industries are searching for strategies to reduce the hot pressing time, therefore will lower the production costs and increase the wood board output capacity. Thus, this paper will focus on the heat transfer to improve the press time that will produce more quality board. By using conventional method, forming the board needs more time during the hot press as wood fiber is a poor heat conductor. By using the same conventional method, this research intends to make an improvement by adding metal oxide nanoparticles to enhance the heat transfer which lead to higher quality board. The result shows that higher temperature profile observed for board with metal oxide nanoparticles instead of normal board. Higher temperature profile resulting higher heat transfer of the board. 0aNanostructured materials