01775nam a2200217 a 4500001001400000003000700014005001700021008004100038020002200079040000800101100001800109245011200127260003400239300004500273502010700318504002800425520100900453650002701462650002201489650004601511vtls000058125KUKTEM20251114204508.0120104t2010    my a   f m    000 0 eng d  aTHE0004243(Local)  aUMP1 aFoo, Chee Yew10aHybrid membranes for separate hydrogen sulfide (H2S) gas from refinery wastewater treatment /cFoo Chee Yew  aKuantan, Pahang :bUMP,c2010  axii, 60 p. :bill. ;c30 cm. +e1 CD-ROM  aProject paper (Bachelor of Chemical Engineering (Gas Technology)) -- Universiti Malaysia Pahang - 2010  aBibliography : p. 50-523 aThe objective of this research is to separate hydrogen sulfide (H2S) gas from refinery wastewater treatment and study the influence of composition on the membrane performance for wastewater treatment. Membranes with monosodium glutamate (MSG) as an additive have been fabricated. Four dope solutions with 22% polyamide and different ratio of formic acid /MSG has prepared. The performance of membranes is evaluated based on eight parameters. There are flow rate, turbidity, Chemical oxygen demand (COD), Biochemical oxygen demand (BOD), pH, sulfide, conductivity and Total dissolve substances (TDS). The results show that membrane with 5% of MSG giving the better results.  A hybrid membrane has high effectiveness in wastewater treatment. It have been reduced the turbidity, Chemical oxygen demand (COD), Biochemical oxygen demand (BOD), pH, sulfide, conductivity and Total dissolve substances (TDS) values for refinery waste water to the accepted level and achieve the requirement for standard A and B. 0aMembranes (Technology) 0aGasesxSeparation 0aSewagexPurificationxMembrane filtration