01489nam a2200217 a 4500001001400000003000700014005001700021008004100038020002200079040000800101100003000109245011600139260003400255300005700289502009000346504004000436520072200476650001701198650003401215650002201249vtls000058654KUKTEM20251114204513.0120313t2010    my a   f m    001 0 eng d  aTHE0004881(Local)  aUMP0 aMohd Faisal Ahmad Shafawi10aEffect of carbon black loading on the mechanical properties of rubber vulcanizates /cMohd Faisal Ahmad Shafawi  aKuantan, Pahang :bUMP,c2010  axiv, 36 p. :bill. (some col.) ;c30 cm. +e1 CD-ROM  aProject paper (Bachelor of Chemical Engineering) -- Universiti Malaysia Pahang - 2010  aIncludes bibliographical references3 aThe effects of filler loading on the tensile and elongation at break of SMR 10 using a sulphur vulcanization system was studied. Carbon black (N220) was used as the fillers and the loading range was from 10 to 40 phr. Two Roll Mill (Model LS-22005) and 25 Ton Hot Cold Molding Press (Model LS22025) used for mixing and molding press. Both equipments were supplied by Lotus Scientific. Tensile and elongation at break were determined using a Universal Testing Machine (Model 133004600771) operating at 20 mm/min. Results show that, elongation at break decreases, but tensile strength, increase with filler loading. This observation is attributed to the rubber–filler interphaseinteraction of carbon black and rubber. 0aCarbon-black 0aRubberxMechanical properties 0aRubberxAdditives