01908nam a2200217 a 4500001001400000003000700014005001700021008004100038020002200079040000800101100002200109245008200131246008000213260003400293300005900327502010800386520112500494650002801619650001101647650003201658vtls000025770KUKTEM20251114204515.0080326t2007    my     f m    000 0 eng|d  aTHE0006801(Local)  aUMP0 aMohd Fitry Ismail10aToolbox for power system fault analysis using MATLAB /cMohd Fitry Bin Ismail3 aToolbox for power system fault analysis using MATLABh[electronic resource]  aKuantan, Pahang :bUMP,c2007  a86 p. :bill. (some col.) ;c30 cm. +e1 computer disc  aProject paper (Bachelor of Electrical Engineering (Power systems)) -- Universiti Malaysia Pahang - 20071 aPower system fault analysis is the process of determining the bus voltages and line currents during the occurrence of various types of faults. Faults on power systems can be divided into three-phase balanced faults and unbalanced faults. Three types of unbalanced  fault  occurrence  on  power  system  transmission  lines  are  single  line  to ground faults, line to line faults, and double line to ground faults. Fault studies are used to select and set the proper protective devices and switchgears. The determination of the bus voltages and line currents is very important in the fault analysis of power system. The process consists of various methods of mathematical calculation which is difficult to perform by hand. The calculation can be easily done by computer which is generated by  a  program  developed  using  MATLAB.  GUI  (Graphical  User  Interface)  will  be provided  with  the  programs  as  they  are  the  components  of  the  toolbox.  This  user friendly toolbox will assist user which among electrical engineering student or trainee engineer to perform the fault analysis of power system -Author 0aElectric fault location 0aMATLAB 0aElectric power transmission