02006nam a2200229 a 4500001001400000003000700014005001700021008004100038020002200079040000800101100003300109245011200142260003400254300004500288500005300333502009000386504002800476520114800504610006801652650004501720650001101765vtls000098169KUKTEM20251114204335.0161124t2016    my a   f      001 0 eng|d  aTHE0000779(Local)  aUMP0 aNur Wahida Binti Mohd Zawawi10aOptimization of rainfall gauging system for rainfall-runoff for lipis river /cNur Wahida Binti Mohd Zawawi  aKuantan, Pahang :bUMP,c2016  axiv, 79 p. :bill. ;c30 cm. +e1 CD-ROM  aFaculty of Civil Engineering and Earth Resources  aProject Paper (Bachelors of Civil Engineering) -- Universiti Malaysia Pahang – 2016  aBibliography : p. 75-762 aThis study is focused on optimization of rainfall gauging system for rainfall runoff at Lipis River, Pahang. The rainfall-runoff model is simulated using Hydrological Modelling System (HEC-HMS) version 3.5. HEC-HMS is software for use in analyzing, planning, and simulating the process of rainfall and runoff. HEC-HMS 3.5 is used in this study to simulate discharge for Lipis River. This study uses rainfall data and stream flow data from January 2008 to December 2014. There are eleven rainfall stations and one stream flow station in Lipis River catchment area. The results of simulation can be generated in form of hydrograph, summary table, and time series table. Root Mean Square Error (RMSE) calculated to show the relationship of the simulated flow and the observed flow. If the RMSE value is lesser, it would indicate that the variables are positively linear related. During evaluation of model, the best value of RMSE value is 11.36 m³/s which is a low value. It shows that the simulated models were fit with the observed data and proves that the HEC HMS is suitable to predict and analyse rainfall-runoff relationship at Lipis River2 aFaculty of Civil Engineering and Earth ResourcesxDissertations 0aUniversities and CollegesxDissertations 0aTheses