01811nam a2200217 a 4500001001400000003000700014005001700021008004100038020002200079040000800101100002500109245009100134260003400225300004400259502009100303504002500394520110600419650002201525650002301547650002301570vtls000063618KUKTEM20251114204519.0120906t2012    my a   f m    000 0 eng d  aTHE0005574(Local)  aUMP0 aFaiz Aswad Ayop Azmi10aDesign and analysis of wheelchair for usage of handicap people /cFaiz Aswad Ayop Azmi  aKuantan, Pahang :bUMP,c2012  axi, 54 p. :bill. ;c30 cm. +e1 CD-ROM  aProject paper (Diploma in Mechanical Engineering) -- Universiti Malaysia Pahang - 2012  aBibliography : p. 303 aThis thesis discussed the design and analysis of wheelchair for usage of handicap people.  The  objectives  of  this  thesis  are  to  design  the  foldable  wheelchair  that  can  be move almost all type of surfaces and to analyze the chassis of the wheelchair. Firstly, this thesis discussed about the present market concept and materials that used for wheelchair. Later,  three  design  concepts  are  suggested  and  the  concept  selection  using concept screening and scoring is made. The design using Solidwork software in part by part of the wheelchair is modelled. The finite element analysis is performed by Algor software. This design analysis focused on two types of chassis materials, which are aluminium alloy and stainless steel. The maximum force of 2000N was applied to chassis model. The analysis of  displacement  distribution,  the  strain  and  stress  contour  later  is  discussed.  The  result shows  that  stainless  steel  is  the  best  material  to  used  for  chassis  of  wheelchair because low in displacement distribution and stress contour compared to aluminium alloy. 0aHuman engineering 0aWheelchairxDesign 0aEngineering design