Mohd Firdaus Ahmad Sani creator text theses my Kuantan, Pahang UMP 2010 monographic eng

print

computer file

xvi, 83 p. : ill. (some col.) ; 30 cm. + 1 computer disc Underground pipe system will place at different place and will pass through the different soil structure. This different soil condition has different soil resistivity that will give the different result of the corrosion rate at same pipeline system. In this experiment, soil resistivities of different type of soils were measured by using Earth Resistance Tester. It is found that the soil resistivity of sand is the lowest at 5.03 kΩ·cm and followed by clay and loam with 94.25 kΩ·cm and 628.32 kΩ·cm respectively. The effect of soil resistivity on corrosion behavior of coated and uncoated specimen were examined by buried the specimen in three different type of soil for 50 days. The surface morphology were examined by using SEM while corrosion rate was calculated using weight loss. Surface morphology examinations indicate the type of corrosion occurred on the steel pipe was uniform corrosion, erosion corrosion and pitting corrosion. It is found the corrosion rate is highest in sand followed by clay, loam and atmosphere. It is also found that coating has decreased the corrosion rate of the specimen with highest at sand which 6.76 mpy followed by clay, loam and atmosphere with 6.36, 5.88 and 1.52 mpy respectively.In conclusion, with the lower soil resistivity, the corrosivity of the steel pipe will be higher. It is also found that coating specimen proves that it can reduce the corrosion rate of the pipeline system. specialized Mohd Firdaus Ahmad Sani Project paper (Bachelor of Mechanical Engineering) -- Universiti Malaysia Pahang - 2010 Bibliography : p. [82]-83 Pipelines Corrosion THE0006450(Local) UMP 110328 20251114204336.0 vtls000052317