02062nam a2200277 a 4500 vtls000051847 KUKTEM 20251114204337.0 110310t2010 my a f m 000 0 eng d THE0006214(Local) 201905161051 aida 201201250829 Fida 201107131640 VLOAD 201103102031 ida UMP TJ246 .F34 2010 rs Bc. Nabil Fahmi Mohtar Modal analysis of pipe joint spiral wound gasket / Nabil Fahmi Mohtar Kuantan, Pahang : UMP, 2010 xvii, 68 p. : ill. (some col.) ; 30 cm. + 1 CD-ROM Project paper (Bachelor of Mechanical Engineering) -- Universiti Malaysia Pahang - 2010 Bibliography : p. 54-55 This project report deals with dynamic behaviour of spiral wound gasket using theoretical and experimental analysis method. This project report is to study the dynamic properties and behaviour of spiral wound gasket by using modal analysis and compare with the finite element analysis. The structural three-dimensional solid modelling of spiral wound gasket was developed using the SOLIDWORK drawing software. The finite element analysis was then performed using ALGOR (FEA). The finite element model of the components was analyzed using the linear modal analysis approach. Finally, the experimental modal analysis was performed using Impact Hammer Testing method. The natural frequency of the mode shape is determined and comparative study was done from both method results. The comparison between natural frequencies of finite element modelling and model testing shows the closeness of the results. From the results, the percentage error had been determined and the limitation in the natural frequency of the spiral wound gasket is observed. Gasket Design and construction Gasket Testing Piping Sealing (Technology) 0 0 0 1 20000 20000 2019-09-04 0 TJ246 .F34 2010 rs Bc. 0000053831 2019-09-04 00:00:00 1 2019-09-04 PSM 0 0 0 1 20000 20000 2019-09-04 0 CD 4931 | TJ246 .F34 2010 rs Bc. 0000053832 2019-09-04 00:00:00 1 2019-09-04 PSM VIRTUA40 384 390 VTLSSORT0080*0200*0400*0900*1000*2450*2600*3000*5020*5040*5200*6500*6501*6502*6503*9992