01503ntm a2200193 a 4500001001400000003000700014005001700021008004100038020002200079040000800101100003900109245012100148260003400269300005700303502009200360504002800452520080500480650002401285vtls000072062KUKTEM20251114204536.0130617t2012    my da  f m    000 0 eng d  aTHE0007373(Local)  aUMP0 aMuhammad Afiq Naquiddin Abd Rahman1 aModeling the magneto- rheological damper using recurrent neural network method /cMuhammad Afiq Naquiddin Abd Rahman  aKuantan, Pahang :bUMP,c2012  axiv, 47 p. :bill. (some col.) ;c30 cm. +e1 CD-ROM  aProject paper (Bachelor of Mechanical Engineering) -- Universiti Malaysia Pahang - 2012  aBibliography : p. 46-473 aThis thesis is study about modeling the Magnetorheological damper using Recurrent Neural Network method. Five different values of current were used in order to modeling the MR damper, which are 0.0 ampere, 0.5 ampere, 1.0 ampere, 1.5 ampere and 2.0 ampere. In order to modeling the MR damper, the graph of simulation damper will be compared with the experimental damper. The results will get the Square Error for the simulation damper. Then, the Root Mean Square Error will be calculated to get the difference between the simulation damper and experimental damper. The results show that the lowest RMSE for the simulation damper were value 0.4008, while the highest RMSE is 1.9882. From the results also, the better current value to modeling the MR damper is using the MR damper with the lowest RMSE. 0aDamping (Mechanics)