02009nam a2200253 a 4500 vtls000075489 KUKTEM 20251114204538.0 131017t2012 my da f m 000 0 eng d THE0007412(Local) 201905160938 fawwaz 201311251613 nabilah 201310171245 nabilah UMP TN695 .S93 2012 rs Bc. Ahmad Syazwan Mohammad The effect of compaction pressure and sintering time on mechanical properties of a waste metal powder / Ahmad Syazwan Mohammad Kuantan, Pahang : UMP, 2012 xiv, 46 p. : ill. ; 30 cm. + 1 CD-ROM Project paper (Bachelor of Mechanical Engineering) -- Universiti Malaysia Pahang – 2012 Bibliography : p. 40-41 Waste metal powder usually obtains by metal cutting process and this metal powder commonly disposes. This research proposes a technique or method to reuse this metal powder. However, there are many challenges in using this waste metal powder which are the waste metal powder mix with oil and it is needed to obtained small size of metal powder. This challenge can be solve by pyrometallurgy and filtering process. This research use powder metallurgy process in order to reuse this metal powder. Compaction pressure and sintering are an important in powder metallurgy process, which affects the final performance of the part. This study investigates the compaction pressure and sintering on mechanical properties of waste metal powder which get from cutting the metal. The correlation between the density and mechanical properties of the fabricated porous parts are intensively studied. It is found that the compaction pressure and sintering time will affect the mechanical properties of the waste metal powder. Metalworking industries Waste disposal Powder metallurgy 0 0 0 1 20000 20000 2019-09-04 0 TN695 .S93 2012 rs Bc. 0000076057 2019-09-04 00:00:00 1 2019-09-04 PSM 0 0 0 1 20000 20000 2019-09-04 0 CD 7290 | TN695 .S93 2012 rs Bc. 0000076058 2019-09-04 00:00:00 1 2019-09-04 PSM VIRTUA40 3887 3893 VTLSSORT0080*0200*0400*0900*1000*2450*2600*3000*5020*5040*5200*6500*6501*9992