01623nam a2200193 a 4500001001400000003000700014005001700021008004100038020002200079040000800101100001900109245006500128260003400193300004600227502010900273504002800382520100600410650001301416vtls000075763KUKTEM20251114204538.0131028t2013    my da  f abm  000 0 eng d  aTHE0003601(Local)  aUMP0 aNur'Ain Hassan10aPressure drop study on tubing for gas flow /cNur'Ain Hassan  aKuantan, Pahang :bUMP,c2013  axiii, 79 p. :bill. ;c30 cm. +e1 CD-ROM  aProject paper (Bachelor of Chemical Engineering (Gas Technology)) -- Universiti Malaysia Pahang – 2013  aBibliography : p. 73-753 aNowadays, tubing was majorly used for pipe replacement in gas industrial or commercial building. This study is to compute pressure drop of gas flow on tube with nitrogen; non-flammable gas, carbon dioxide and oxygen gas as medium. It was conducted on several tubes, 3/8 inch, 1/2 inch, 3/4 inch, 1 inch, and 1 1/2 inch outside diameter size respectively. The data was calculated based on pressure drop mathematical formula. The flow rate was manipulated in order to determine the pressure drop. The pressure was kept constant at 25 psig, 50 psig and 100 psig. A computer simulation also developed to effectively design of the process. The computer simulation was conducted to compute pressure drop at higher pressure, flow rate and size of tube. Data of pressure drop that obtained for each of type gas flow was increases as the flow rate increase and decrease as well as the diameter of tube increase. Results that were obtained can be used as reference and guidance for the designer of gas pipeline. 0aGas flow