01850nam a2200241 a 4500 vtls000075763 KUKTEM 20251114204538.0 131028t2013 my da f abm 000 0 eng d THE0003601(Local) 201905152039 zulaiha 201310281646 nabilah UMP TJ1025 .A36 2013 rs Bc. Nur'Ain Hassan Pressure drop study on tubing for gas flow / Nur'Ain Hassan Kuantan, Pahang : UMP, 2013 xiii, 79 p. : ill. ; 30 cm. + 1 CD-ROM Project paper (Bachelor of Chemical Engineering (Gas Technology)) -- Universiti Malaysia Pahang – 2013 Bibliography : p. 73-75 Nowadays, tubing was majorly used for pipe replacement in gas industrial or commercial building. This study is to compute pressure drop of gas flow on tube with nitrogen; non-flammable gas, carbon dioxide and oxygen gas as medium. It was conducted on several tubes, 3/8 inch, 1/2 inch, 3/4 inch, 1 inch, and 1 1/2 inch outside diameter size respectively. The data was calculated based on pressure drop mathematical formula. The flow rate was manipulated in order to determine the pressure drop. The pressure was kept constant at 25 psig, 50 psig and 100 psig. A computer simulation also developed to effectively design of the process. The computer simulation was conducted to compute pressure drop at higher pressure, flow rate and size of tube. Data of pressure drop that obtained for each of type gas flow was increases as the flow rate increase and decrease as well as the diameter of tube increase. Results that were obtained can be used as reference and guidance for the designer of gas pipeline. Gas flow 0 0 0 1 10000 10000 2019-09-04 0 TJ1025 .A36 2013 rs Bc. 0000076157 2019-09-04 00:00:00 1 2019-09-04 PSM 0 0 0 1 10000 10000 2019-09-04 0 CD 7340 | TJ1025 .A36 2013 rs Bc. 0000076158 2019-09-04 00:00:00 1 2019-09-04 PSM VIRTUA40 3895 3901 VTLSSORT0080*0200*0400*0900*1000*2450*2600*3000*5020*5040*5200*6500*9992