01943ntm a2200253 a 4500 vtls000073392 KUKTEM 20251114204540.0 130715t2012 my da f m 000 0 eng d THE0003996(Local) 201905151030 fauzi 201307151055 huda UMP TP156.E8 F33 2012 rs Bc. Muhammad Fadhlul Hanin Ismail Optimization of biodiesel production from cooking palm oil using response surface methodology (RSM) approaces / Muhammad Fadhlul Hanin Ismail Kuantan, Pahang : UMP, 2012 xiii, 53 p. : ill. (some col.) ; 30 cm. + 1 CD-ROM Project paper (Bachelor of Chemical Engineering in Biotechnology) -- Universiti Malaysia Pahang - 2012 Bibliography : p. 43-50 Biodiesel is one of the renewable energy resource which is suitable to replace the fossil fuel due to the depletion of fossil fuel in the future. The modeling of the design of experiment for optimization of biodiesel production from cooking palm oil is conducted by using Design Expert software version 7.1.6 (Stat Ease). This experimental design is conducted in order to optimize the biodiesel production with significant parameters that affecting the biodiesel production. The parameters that have been used are reaction temperature, methanol to oil molar ratio, catalyst concentration and reaction time. By using response surface methodology (RSM), the optimal parameters levels are determined. The optimum conditions for biodiesel production were at temperature of 72.83°C, alcohol to oil molar ratio of 9.5:1, 3.95% of catalyst concentration and 4.73 hours of reaction time, which was obtained 88.38% of biodiesel yield Extraction (Chemistry) Response surfaces (Statistics) 0 0 0 1 10000 10000 2019-09-04 0 TP156.E8 F33 2012 rs Bc. 0000074994 2019-09-04 00:00:00 1 2019-09-04 PSM 0 0 0 1 10000 10000 2019-09-04 0 CD 7196 | TP156.E8 F33 2012 rs Bc. 0000074995 2019-09-04 00:00:00 1 2019-09-04 PSM VIRTUA40 3948 3954 VTLSSORT0080*0200*0400*0900*1000*2450*2600*3000*5020*5040*5200*6500*6501*9992