01854nam a2200253 a 4500 vtls000075738 KUKTEM 20251114204542.0 131025t2013 my da f abm 000 0 eng d THE0004183(Local) 201905141733 farhana 201310251542 nabilah UMP TP156.P6 L39 2013 rs Bc. Law, Woon Phui Optimization of solution polymerization of methyl methacrylate / Law Woon Phui Kuantan, Pahang : UMP, 2013 xviii, 78 p. : ill. ; 30 cm. + 1 CD-ROM Project paper (Bachelor of Chemical Engineering) -- Universiti Malaysia Pahang – 2013 Bibliography : p. 67-72 In this study, optimization of reactor and jacket dynamics were carried out for the solution polymerization of MMA with toluene in batch reactor. The purpose of this study is to optimize the process condition in polymerization in order to obtain maximum conversion in minimum batch time. The gel effect, glass effect, non-linear kinetic and high exothermic reactions were considered. Initiator efficiency and overall heat transfer coefficient assumed remain constant. Optimization of MMA solution polymerization was based on three stage polymerization model (TSPM) by using MATLAB software. Ode23t solver was used in solving this moderate stiff problem. The results showed that high conversion was obtained at optimum concentration of initiator (AIBN), reactor temperature and jacket temperature. Simulation of the solution polymerization of MMA in this study showed that MATLAB was an effective and economical problem solving tools in engineering works. Polymerization Methyl methacrylate 0 0 0 1 10000 10000 2019-09-04 0 TP156.P6 L39 2013 rs Bc. 0000074629 2019-09-04 00:00:00 1 2019-09-04 PSM 0 0 0 1 10000 10000 2019-09-04 0 CD 7014 | TP156.P6 L39 2013 rs Bc. 0000074630 2019-09-04 00:00:00 1 2019-09-04 PSM VIRTUA40 3993 3999 VTLSSORT0080*0200*0400*0900*1000*2450*2600*3000*5020*5040*5200*6500*6501*9992