02100nam a2200253 a 4500 vtls000075442 KUKTEM 20251114204545.0 131017t2013 my da f m 000 0 eng d THE0003265(Local) 201905161155 irma 201311251605 nabilah 201310171014 nabilah UMP TD757 .A55 2013 rs Bc. Mohd Amirul Hakim Hamidi Removal mercury from wastewater by electrocoagulation using iron plate as electrode / Mohd Amirul Hakim Hamidi Kuantan, Pahang : UMP, 2013 xiii, 59 p. : ill. ; 30 cm. + 1 CD-ROM Project paper (Bachelor of Chemical Engineering (Chemical Engineering)) -- Universiti Malaysia Pahang – 2013 Bibliography : p. 57-59 Electrocoagulation is the removal process that based on electricity which used electrolysis concept. This process can remove contaminant like mercury which cannot be removed through filtration. This technique is economic and environmental friendly for wastewater treatment. Research studied was performed using synthetic mercury to determine the efficiency of mercury removal using this process. The objective of this research is to investigate the efficiency of mercury removal using iron electrode using different parameters including flow rate, charge loading and distance between electrodes. Electrocoagulation OT-1 model was used to perform the experiment and conductivity meter was used to perform the analysis. After all the analysis were performed its shows significant result which is about 90.10% of mercury successfully removed from the synthetic mercury solution. The highest flow rate 160 L/h and longest distance between electrodes 5cm contributed to the result of 90.10% removal of mercury from synthetic mercury solution. The highest charge loading also play importance role on removal of mercury. Electrocoagulation Sewage Purification 0 0 0 1 10000 10000 2019-09-04 0 TD757 .A55 2013 rs Bc. 0000074611 2019-09-04 00:00:00 1 2019-09-04 PSM 0 0 0 1 10000 10000 2019-09-04 0 CD 7005 | TD757 .A55 2013 rs Bc. 0000074612 2019-09-04 00:00:00 1 2019-09-04 PSM VIRTUA40 4064 4070 VTLSSORT0080*0200*0400*0900*1000*2450*2600*3000*5020*5040*5200*6500*6501*9992