01711nam a2200241 a 4500 vtls000078139 KUKTEM 20251114204556.0 140509t2013 my a f m 000 0 eng d THE0006434(Local) 201905131524 amirul 201405090943 training3 201405090940 training3 UMP TJ857 . A55 2013 rs Bc. Anis Syarliza Ahmad Modeling, simulation and experimental verification of hydraulic servo system / Anis Syarliza Ahmad Kuantan, Pahang : UMP, 2013 xvi,47 p. : ill. (some col.) ; 30 cm. + 1 CD-ROM Project paper (Bachelor of Engineering in Manufacturing) -- Universiti Malaysia Pahang – 2013 a Bibliography : p. 46-47 The aim of this project is to model, simulate and analyze the performance of the hydraulic servo system using MATLAB and Simulink. Experiments were conducted using open loop and closed loop control. In open loop control, the experiment was conducted for various speeds by supplying voltage to actuator from 5V to 10V. The open loop experimental data were used to determine the transfer function of the system. In closed loop control, the PI, PD and PID controllers were implemented in the hydraulic servo system and the desired positions were set to 30 mm, 50 mm and 70 mm. The results of the closed loop control showed that the PID controller produced better performance. The results also indicate that the transfer function model represented the actual system very well. Hydraulic servomechanisms 0 0 0 1 20000 20000 2019-09-04 0 TJ857 . A55 2013 rs Bc. 0000080218 2019-09-04 00:00:00 1 2019-09-04 PSM 0 0 0 1 20000 20000 2019-09-04 0 CD 7722 | TJ857 . A55 2013 rs Bc. 0000080219 2019-09-04 00:00:00 1 2019-09-04 PSM VIRTUA40 4372 4378 VTLSSORT0080*0200*0400*0900*1000*2450*2600*3000*5020*5040*5200*6500*9992